If your gas water heater keeps shutting off, the thermocouple could be dirty, bent or damaged. The thermocouple is usually easily visible next to the pilot light. Inspect the thermocouple to determine if it is dirty or damaged in some way. If it is dirty, turn off the gas to allow the thermocouple to cool.
Why does my hot water heater reset button keep tripping?
In some cases, the water heater reset button will repeatedly trip. This is a warning sign of a larger issue such as a faulty thermostat, loose wiring, corroded parts, a grounding problem, or a malfunctioning high limit switch.May 28, 2021
How do you clean a thermocouple on a water heater?
Clean the thermocouple - using the emery cloth sandpaper, sand the ends of the thermocouple and then give it a finishing touch with the lint-free cloth. Hopefully, you can get to the ends of the thermocouple without having to detach it from the assembly, but you may have to do that.
Why does my hot water heater keep hitting the reset button?
This indicates that the thermostats are bad or going bad. The reset button usually trips for safety to prevent the tank from overheating and potentially becoming a bomb. If your heater is continuously tripping you should call a Orlando plumbing company to replace the thermostats.Jan 16, 2018
Why does a water heater thermostat trip?
One common thermostat problem with electric water heaters occurs when the lower thermostat becomes “stuck” in the ON position and doesn't cycle the lower element off properly. When this happens, heat builds up in the upper portion of the storage tank, which will eventually trip the reset button.Jan 18, 2018
How do I know if my water heater thermostat is bad?
https://www.youtube.com/watch?v=qCXmyhEY_k4
How long do you hold the reset button on a hot water heater?
Some heaters may not click when you press on the reset button. If you don't hear the click even after pressing on the button for about five seconds, reassemble the heater anyway. It will probably still restore hot water.
How do you clean a dirty thermocouple?
The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.
Does cleaning a thermocouple work?
Yes, you can clean a thermocouple, but the task must be done with a light touch. Remove the thermocouple from the process assembly, using a steel wool or emery cloth, lightly clean the tip removing any build up. Cleaning a thermocouple is not a fix for an issue, such as inaccurate readings.Sep 7, 2021
How can you tell if your thermocouple is bad?
If you can't get the flame to light at all, and you're sure the gas is on, there's probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that's the sign of a thermocouple malfunction.