According to the type of load, SSR can be divided into two types: DC Solid State Relay (DC-SSR) and AC Solid State Relay (AC-SSR). The DC-SSRs act as a load switch on the DC power supplies, and the AC-SSRs act as a load switch on the AC power supplies.
What is SSR used for?
A solid state relay (SSR) is an electrical switch that can be used to turn things on and off using another electrical input. Unlike Electromechanical Relays (EMRs), the SSR uses semiconductor switches and optoelectronics instead of magnetism and moving contacts.
What is an SSR electrical?
A Solid State Relay (SSR) is a relay that does not have a moving contact. In terms of operation, SSRs are not very different from mechanical relays that have moving contacts. SSRs, however, employ semiconductor switching elements, such as thyristors, triacs, diodes, and transistors.
Where are solid-state relays used?
The most common application of solid state relays is in the switching of an AC load, whether that is to control the AC power for ON/OFF switching, light dimming, motor speed control or other such applications where power control is needed, these AC loads can be easily controlled with a low current DC voltage using a
What is solid state control?
A solid state relay (SSR) is an electronic switching device that switches on or off when an external voltage (AC or DC) is applied across its control terminals. It serves the same function as an electromechanical relay, but has no moving parts and therefore results in a longer operational lifetime.
When would you use a solid state relay?
A solid state relay is ideal when fast, frequent switching is required. For example, precision temperature control of an industrial oven might require switching off the mains supply to the heating elements every two or three seconds.
Is solid state relay better?
An SSR is definitely a faster device and provides a longer lifetime, which is important in high-speed switching. Bretz: Solid-state relays are best for high-speed applications and for those applications that require millions of operations.
What do solid state relays do?
A solid state relay (SSR) is an electronic switching device that switches on or off when an external voltage (AC or DC) is applied across its control terminals. The relay may be designed to switch either AC or DC loads.
Can solid state relay be used for DC?
Can a DC load be used with Solid-state Relays for AC loads? No, it cannot be used. The element characteristics of Solid-state Relays will not allow it to reset if a DC load is used.
When should a solid state relay not be used?
2) SSR. A high noise surge voltage applied to the SSR load circuit can cause malfunction or permanent damage to the device. If such a high surge is anticipated, use a varistor across the SSR output. If an inductive load generates spike voltages which exceed the absolute maximum rating, the spike voltage must be limited