Open the drawer under the oven. Inside towards the back near the center along the top there is a metal prong sticking out - like a mini-sprinkler pipe. At the end of the pipe is something that looks like a sprinkler head. This is where the pilot light is located and where it must be lit.
How do I relight the pilot on my oven?
- Make sure the oven is turned off.
- Open the oven door and locate the pilot light opening at the bottom of the oven. ...
- Use a grill lighter or long match to light the pilot light valve at the bottom of the oven.
- Some ovens are designed to be manually lit at each use.
How do I light pilot on gas oven?
- Make sure the oven is turned off.
- Open the oven door and locate the pilot light opening at the bottom of the oven. ...
- Use a grill lighter or long match to light the pilot light valve at the bottom of the oven.
- Some ovens are designed to be manually lit at each use.
How do I know if my oven pilot light is on?
If the oven has a pilot light, you will see a gas tube that may or may not have a small blue flame burning at its end. If the oven has a glow bar, however, you'll see an insulated electronic device centered in the burner.
How do you start a Magic Chef RV oven?
https://www.youtube.com/watch?v=IDwd3enbbjc
How do you light the pilot light on a Magic Chef gas oven?
Set the oven's temperature to "Off", remove the stove's oven control knob, and push in on the metal control rod there while holding a lighter under that sprinkler head— this should cause the pilot to light. Hold the control rod in for a few seconds to allow the pilot to warm up the oven's thermocouple, then release it.
Where is the pilot light on a Magic Chef RV oven?
Magic Chef ovens have a tiny little screw on the front of the thermostat assembly, behind the knob. This is a gas adjustment for the pilot. Loosen it with a screwdriver to increase the pilot flame size.Oct 30, 2015
Do all ovens have a pilot light?
Most newer gas ranges and ovens don't have pilot lights. Instead, the gas is ignited by an electric ignition system. In this type of system, an element becomes hot and glows like the filament in a lightbulb when an electric current passes through it.