Cars & Other Vehicles

What you need to know about open sprinkler valves and how to tell if a valve is working.

If you don't turn off your valve after completing all of these steps, it's not because you have a broken valve.The electronic system controller is either broken or currently supplying the valve with an electronic charge which turns it on.You can shut the valve off by adjusting, unplugging or fixing the controller.

The valve needs to be repaired or replaced if it doesn't shut off after 30 seconds.The valves that take longer than 30 seconds to close are in dire need of repair.

The most important component of your in-ground sprinkler system is the valves which control water distribution.A valve that sticks open can turn your lawn into a swamp in a matter of minutes.Although many homeowners prefer to call their local irrigation maintenance company, fixing a valve that is stuck open is a task that anyone can do.

When you locate the flow control on the valve, use your fingers to turn it to the right until it stops, and then you'll be good to go.If air pockets are preventing the valve from shutting off, the action is to flush them out and open it back up by four turns.

Turn the valve's solenoid, a cylinder-shaped plastic piece with two wires sticking out of it, all the way to the right.This action makes sure that the valve is shut off.

The irrigation system has a main water supply.You can usually find it near the outlet in your home or basement.Shut it off.

Remove the cover from the valve with a screwdriver.Don't loosen the large spring which sits on top of the rubber diaphragm if you remove it.The area underneath the diaphragm should be clear of debris.There are no obstructions that prevent the valve from cutting the flow of water.

What you need to know about open sprinkler valves and how to tell if a valve is working.

Related Posts: