What type of nail do you use when building a fence?
All nails are not the same and a fence is only as strong as the nails that hold it together.When the wrong type of nail is used to build a fence, it is obvious.As it gets wet, wood expands and contracts.Expanding and contracting wood is the main cause of pickets falling off of the rails.Regardless of the design, rails, posts and pickets are the common factors in wood fences, and all require the use of nails that are capable of holding them together.
Fence rails and pickets have the same importance as nails used tofasten them.The panels can come loose from the posts if the nail is the wrong size.16-d nails are the most appropriate for fence rails.A ring-shank nail has ridges all the way down the nail's shank, which makes pulling it out difficult.
The type of wood you're using affects the nail material.cedar and redwood fencing can be done with aluminum andstainless steel.Hot-Dipped galvanized or stainless steel nails can be used for pressure-treated wood.
The rails and pickets can't be fastened with any type of nail, even though the fence built out of pine is the least corrosive.The pine fence is prone to warping and curling pickets.To minimize warping and curling pickets, use 6-d (2-inch) ring shank nails made out of galvanized steel.It is not recommended for cedar fences to use galvanized steel, it has the potential to eventually corrode and is less expensive than aluminum.The cost of the fence can be lowered by using galvanized steel nails.
The lumber is protected from rot and insect damage.It is the most economical choice for wood fencing.It's important to choose the right nail for this type of lumber because the chemicals are corrosive to some metals.The standard option is hot-dipped galvanized nails.It is the most reliable material for pressure-treated wood.Use 6-d (2-inch) rink shank nails to nail pickets.