What to do if your dishwasher has an LC error code?
The water leakage error is indicated by the dishwasher error code LC.A water leak has been detected by the leak sensor in the dishwasher.The LC error can be caused by the formation of Moisture.
There may be an issue with the leak sensor if you find residual water under the dishwasher.When there is excess water in the tank, the leak sensor sends a signal to the control module to start the drain pump.You will get the error in this scenario.
The dishwasher will not turn off during this error.The excess water will be removed.
The LC error will usually go away.You will need to check the other parts of the dishwasher if you still get the issue.
You have to check the other causes of Error LC if you observe that there is no water leak in the dishwasher.Look at them.
The appropriate amount of detergent is always recommended.Too much detergent can harm the dishwasher.The dispensers may overfill quickly if there is more detergent.The LC error code will be caused by it.
If your dishwasher is recently installed or moved to a new home, there may be a build-up of condensation in the dishwasher.The leak sensor will be told that water is leaking.
If you want to clear this Error, we recommend not to use the dishwasher for a day so that the leak sensor won't give a false error.
Did you connect your dishwasher to the garbage disposal recently?You need to remove the garbage disposal cap.Make sure there is no cap.If there is a cap on the garbage disposal, remove it and start the dishwasher again.
The garbage cap is supposed to hold the undissolved molecule.During the time of cleaning the machine, it is removed.The water may not drain properly when the garbage disposal cap is too full.
The garbage disposal cap needs to be removed every day.Errors will not happen if you keep cleaning the cap.The dishwasher should be cleaned at least once a week.Hopefully, the error won't happen again.
You have to reset the error code if you see continuous error LC on the screen.To clear the LC code, you have to remove the dishwasher from the main power supply and the water supply.
It will help to reset the error code and allow the drying of any water that has formed in the dishwasher.The leak sensor will work if the humidity is dry.The leak sensor will display a problem code even if there isn't much water.
If the above suggestions don't work for you, you may have to check for leaks sensor issues.It is possible to remove and inspect the leak sensor.How to do it is shown in the steps.
Hopefully, the error won't happen again in the dishwasher.If you see that the leak sensor is malfunctioning, please replace it with a new one.
The water may leak from the dishwasher if the water hose is not securely fitted.If you have to, change any broken pipes.The drain hose and other pipes should not be blocked.