What size socket is needed for a water heater element?
What size socket is needed for a water heater element?
If you have a 1/2" drive socket you can use a Drive x 1-1/2 inch socket. The socket's opening will fit the hex end on all standard residential water heater elements. To remove a water heater element without an element wrench, you simply place the 1-1/2 socket over the head of the heating element.
What size socket fits RV water heater drain plug?
Specially designed wrench with 7/8" and 15/16" openings fits most RV drain plugs.
What size is an Atwood water heater drain plug?
1/2 inch
What size is drain plug on Dometic water heater?
1/2 Inch
How do you replace a hot water heater drain plug?
https://www.youtube.com/watch?v=FgzEDZ61bDE
How do you replace a water heater drain valve?
- Turn Off the Power or Gas. ...
- Turn Off the Water Supply. ...
- Drain the Tank. ...
- Remove the Old Drain Valve. ...
- Install the New Drain Valve. ...
- Fill the Water Heater. ...
- Turn on the Power or Gas. ...
- Check the Valve for Leaks.
How do you remove a broken plastic plug?
Heat the tip of a wide, flat screwdriver with a propane torch so it will melt the plastic and make a slot. Let the screwdriver tip cool and try to unscrew it with the screw driver. Drill 2 holes so I can stick the tips of slightly open needle nose pliers in the holes and twist it off.16 abr 2014
What kind of plug does a water heater use?
Electric water heaters require a 240-volt dedicated circuit, which serves only the water heater and no other appliances or devices. The circuit wiring typically includes a 30-amp double-pole breaker and 10-2 non-metallic (NM) or MC cable.17 nov 2021
What size is the drain plug on an RV water heater?
Designed for use with RV Water Heater Drain Plugs Fits both 7/8-inch and 15/16-inch drain plugs.
What size are water heater drains?
A standard water heater drain valve for a residential hot water heater is 3/4 in. thread size.
What size is the drain plug on a suburban RV water heater?