James Hardie recommends 1-1/4'' long galvanized or STAINLESS steel roofing nails or 1-1/4'' long ribbed waferhead screws in compliance with the tile industry. It is 8-18 x 3/8'' HD.
Is it OK to drill into Hardie board?
It can be cut and drilled just like wood. However, drilling through cement-fiber siding goes better if you use a carbide drill bit, as opposed to a regular steel drill bit. ... Just remember that drilling before it is installed requires extra care to avoid breaking the strip.
How do you attach things to Hardie board?
Generally speaking, items can be attached to Hardie® siding by using either corrosion resistant nails or screws. The fasteners must be long enough to go through the siding and into wood or metal substrate (e.g. sheathing or studs).Nov 25, 2015
Can you screw into fiber cement board?
Fiber cement siding can be nailed by hand or with a pneumatic nailer. It can also be attached using corrosion resistant screws. Use hot-dipped galvanized or stainless steel nails.
Can you screw into Hardie plank siding?
HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel.
Can I screw into cement board siding?
It can be cut and drilled just like wood. However, drilling through cement-fiber siding goes better if you use a carbide drill bit, as opposed to a regular steel drill bit. Cement-fiber siding can be drilled while installed on a house or prior to installation. ... Mark the siding where you want to drill the hole.
Are there special screws for Hardie board?
James Hardie recommends 1-1/4'' long galvanized or STAINLESS steel roofing nails or 1-1/4'' long ribbed waferhead screws in compliance with the tile industry. It is 8-18 x 3/8'' HD.
Can you use screws for Hardie board?
What is the correct fastener pattern for installing HardieBacker® cement board? Fasten HardieBacker sheets with proper nails or screws (as listed in ''Materials Required'' in the backer installation instructions) every 8'' around the perimeter and all supporting studs.
How do you hang things on Hardie board siding?
Our Answer. The best way to attach to Hardie Plank siding is by using nails or screws. To avoid cracking the siding, pilot drill the siding first, using drill bit a little smaller than the nail or screw. And to make the sure the hole you are forming doesn't leak, caulk the hole before driving in the fastener.