What kind of oil do you put in a Craftsman pressure washer?
What kind of oil do you put in a Craftsman pressure washer?
You can use 5w30, 10w30 or SAE30wt oil depending on the ambient temperature. In ambient temperatures of 55-above SAE30 wt is recommended.Aug 13, 2009
How do you drain the oil on a Craftsman pressure washer?
To drain the crankcase of oil, tilt the pressure washer over on its side that the side the oil dipstick tube or filler plug is located to drain the oil. You also have the option of sucking the oil out of the filler tube with an oil suction tool.Apr 3, 2009
Do Craftsman pressure washers have oil?
The manual say to use 10W30 and the in the box it came supplied with SAE30. You can use 5w30, 10w30 or SAE30wt oil depending on the ambient temperature. In ambient temperatures of 55-above SAE30 wt is recommended.Aug 13, 2009
How do I drain the oil from my pressure washer?
Drain the oil and fuel from the engine. Remove the oil cap on the water pump with an Allen wrench. Tilt the pressure washer to drain the used oil into an approved container. Tilt the unit back in the opposite direction after the oil has drained.
What kind of oil do I put in my Craftsman pressure washer?
You can use 5w30, 10w30 or SAE30wt oil depending on the ambient temperature. In ambient temperatures of 55-above SAE30 wt is recommended.Aug 13, 2009
What kind of oil does a Craftsman power washer take?
You can use 5w30, 10w30 or SAE30wt oil depending on the ambient temperature. In ambient temperatures of 55-above SAE30 wt is recommended.Aug 13, 2009
Does a pressure washer pump take oil?
Pressure washer water pumps need relatively low oil recommended by the manufacturer, as specified in the owner's manual. (Purchase pre-measured bottles of pump oil for water pumps without dipsticks.) Never use special oil additives or detergents, unless specified in the owner's manual.