Chem film or Alodine is a chemical conversion coating that's mostly used to protect aluminum from corrosion. It's primarily used to passivate aluminum as it protects this metal and serves as a base for paint coatings. It leaves aluminum unaffected, so it's easier to put paint over it without changing anything.
What is the difference between alodine 600 and 1200?
Color: Light Iridescent Gold to Tan, depending on aluminum alloy. The differences seen are that the #600 can be applied by an immersion dip, while the #1200 is applied by spray. A toner is used with the #600 and not with the 1200S I hope this helps.
How do you apply alodine?
APPLICATION OF ALODINE Apply the diluted Alodine liberally to the aluminium surface. Treat only as large an area at one time as can be conveniently handled with the equipment being used (approximately 6-10 square feet of surface.)
How long do you leave alodine on?
Operation: Time: 2 minutes to 5 minutes. Temperature: room temperature to 100° Fahrenheit. ALODINE 1201 coating chemical should not be allowed to dry on the metal surface. With brush application the surface should be rewet with fresh ALODINE 1201 several times during the treatment time.
What is alodine 600 used for?
ALODINE 600 is a powdered chemical used to produce a chromate conversion coating on aluminium and its alloys, which ranges in colour from light, iridescent golden to tan. This product does not contain complex cyanides. It is particularly recommended where a low dielectric resistance coating is desired.Aug 12, 1996
Does alodine expire?
Alodine® 1200 B contains fluorides. The expiry date of the product is given on the packaging labels. The expiry date of the product is given on the packaging labels.
What is alodine1200?
Alodine® 1200 S is a powdered chemical used to produce a. protective coating on aluminium which ranges in colour from light iridescent golden to tan. The process is operated at room temperature. The coating produced minimizes corrosion and provides an improved bond for paint.Aug 20, 2008
What is the difference between alodine and Alocrom?
Alocrom 1200 is marketed under the name Alodine 1200 outside of the UK and drawings calling for Alodine 1200 can be coated with Alocrom 1200 and vice versa. ... For example, for maximum electrical conductivity, the coating is colourless to very light yellow, whereas for maximum corrosion protection it is a deeper yellow.
How do you use Bonderite?
Activate by holding the applicator tip down on the surface to be treated. Press the pen tip down for 15 to 30 seconds to open the spring valve allowing BONDERITE M-CR 1132 AERO to wet the applicator tip. When the BONDERITE M-CR 1132 AERO just wets the tip, release the downward pressure. The unit is ready to use.
How do you apply Bonderite to alodine?
Apply BONDERITE M-CR 1201 AERO (known as ALODINE 1201): For immersion application, BONDERITE M-CR 1201 AERO (known as ALODINE 1201) is diluted by mixing 33 parts of BONDERITE M-CR 1201 AERO (known as ALODINE 1201) and 67 parts of water for each 100 parts of bath volume required.
What is Bonderite?
Overview. BONDERITE® metal pre-treatments are designed to clean, coat and protect multi-metal surfaces. The Bonderite® products provide excellent corrosion protection, deeply adhered surface preparation and durability for extended equipment life.