G13 sockets have a distance of 25mm and are used to connect T8 fluorescent tubes. 2GX13 fittings are used for circular fluorescent tubes with four contact point (two on the inside and two on the outside).
Is G13 the same as T8?
A T8 tube is also called a TL-D tube from Philips and a Lumilux tube from Osram. You can recognize a T8 tube from it's 28mm diameter. The socket is called G13 this because the 2 pins are 13mm apart from each other. . A T8 tube can work on an electronical ballast using a fixture without a starter.
Is G13 the same as T12?
T12 38mm (G13) Fluorescent Tubes The largest size T12 (38mm) is no longer being manufactured, however, they did use the same G13 cap as the T8 fluorescent tube which means that you can replace the T12 tubes with the more efficient T8 of the same length.
How do I know what base my light bulb is?
A further explanation of the light bulb base sizes, you can look at the letter-number references (E12, E17, and E26) to help understand a bulbs base style and size. The first letter designates the shape or form of the base, and the number represents the width of the base (normally in millimeters).
Are T8 bulbs being discontinued?
Even some T8 lamps have been phased out. US Congress has enacted legislation to prohibit the manufacture of these and other inefficient lighting technologies, and is calling for manufacturers to meet minimum efficiency requirements and lumens per watt for new products.
What is T8 tube?
T8 bulbs are 8 eighths of an inch, or one inch in diameter. Other common sizes are T12 bulbs which are twelve eighths of an inch or 1.5 inches diameter, and the T5 lamps which are five eighths of an inch, or . 625 inches in diameter.
What is a G13 light fitting?
Fluorescent G13 tube base types are a two pin fitting located at each of the tube with 13mm between the two pins. The T8 (26mm diameter) and T12 (38mm diameter) uses the G13 cap fitting. G13 tube fittings are commonly used in kitchens, garages, and office buildings.
What type of fluorescent tube do I have?
In order to identify which size you need, the easiest way to tell is to read the label near the base of the tube. If this information is no longer legible, you can measure the bulb's diameter. Fluorescent tubes are measured in eighths of an inch.
What does G13 mean on fluorescent tube?
You can recognize a T8 tube from it's 28mm diameter. The socket is called G13 this because the 2 pins are 13mm apart from each other. . A T8 tube can work on an electronical ballast using a fixture without a starter. As with a conventional ballast, a fixture with a starter.
Why are T12 lamps being discontinued?
In response, Congress made legislation stating that T12 linear fluorescents and other inefficient lighting technologies would no longer be manufactured. This legislation was put into action in 2012 with the DOE regulating T12 linear fluorescent lamps as a way of encouraging consumers to be more energy efficient.