- Corner hinges. These are typically used on metal cabinets and machine covers and sit flush to the surface.
- Lift-off hinges.
- Offset hinges.
- Piano hinges.
- Leaf hinges.
- Concealed hinges.
- Side hinges.
- Weld-on hinges.
How are projection hinges measured?
Measurements for Parliament Hinges and Projection Hinges are normally shown in the following way: Height x Projection x Fully Open Width (the "Projection" measurement is the maximum projection achievable at 180 degrees).
Can a door open 180 degrees?
Wide throw hinges are used when you need extra clearance behind a door typically a door that opens 180 degrees. Today, they are more commonly used when a door needs to open 180 degrees and sit parallel with the wall, held open on magnetic holders.1 Sept 2011
What size is a standard interior door hinge?
3.5"
How do I know what size hinge I need?
In general, you'll want to use one hinge for every 30 inches of door height. For example: Use two hinges for doors up to 60 inches tall. Use three hinges if the door is between 60 and 90 inches tall.9 Oct 2019
How do you size a hinge?
Use your ruler or measuring tape to measure the width from one leaf edge to the pin in the middle of the hinge. Then multiply that figure by two; the width of a hinge is the sum of two leaf widths. A hinge's width is vital to its pin and knuckle action.
What is the most common hinge?
butt hinge
How do wide throw hinges work?
Hinges of this type feature an offset pivot point that allows the door to swing completely clear of the opening. Wide throw hinges are generally wider than they are tall, which moves the hinge's pivot point outward and allows the door to swing clear of the thick jamb casing.
What is a hinge throw?
Wide throw door hinges are used on openings where the door must swing up to 180 degrees without binding on protruding trim installed on the face of the frame or wall. Door width, door thickness, hinge backset, and the clearance beyond the face of the frame.20 Aug 2018
What is a broad hinge?
General Purpose Broad Hinges are designed for utility type applications. The removable pin provides easier installation and/or removal of doors.
Are parliament hinges secure?
Security Advice For Using Parliament Hinges The hinge protrudes from the frame of the door and can therefore be a target for burglars who have the tools to cut through. A solution to this is to install security bolts on the frame, which will prevent anyone from being able to remove the doors.
How do projection hinges work?
Projection hinges are drilled with holes towards the edge of a broad hinge leaf, enabling the hinge to clear obstructions when fully open beyond 90 degrees. When a door is to be opened beyond 90 degrees the width of a hinge can be calculated as follows: Door thickness plus inset (normally 3.2mm) less backset.