Pockets are mounted at the center of gravity of the column, allowing a forklift to easily and safely pick up the column. ... Forklift pockets are available as a factory-installed option or may be field-installed on columns in service.
FORKS. Also known as the tynes, the forks on a forklift are used to make direct contact with a load for transport. They are attached to the forklift carriage and are designed to carry a load from the bottom.
What are forklift Tynes?
Also known as the tynes, the forks on a forklift are used to make direct contact with a load for transport. They are attached to the forklift carriage and are designed to carry a load from the bottom.
What is standard fork size on forklift?
Fork Length – The most common fork length is 42-inchs for both Class II and Class III carriages. This size allows for a standard 48-inch length pallet to be adequately supported without the fork tips protruding and possibly damaging whatever is behind the skid.
What is the standard forklift width?
between 4 to 7 ft wide
What are parts of a forklift?
- Cab: The cab is the central part of the forklift. ...
- Carriage: The carriage mounts the forks to the mast and serves as a support structure for the forklift.
- Mast: The mast is the part of the forklift that lifts and lowers the load. ...
- Load Backrest: ...
- Forks: ...
- Overhead Guard: ...
- Tires: ...
- Counterweight:
What are the 3 major parts of a forklift?
The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.Aug 24, 2019
Can you drill holes in forklift forks?
10 Forklift Fork Dont's Do not allow maintenance shops to bend forks back into shape, weld on them or drill holes through them. Avoid adding attachments to the truck that stress the forks. Do not use forks to open rail car doors or to break loads out/away from other loads.Dec 27, 2020
What is the width of a fork?
Fork Width – Fork width is commonly 4-inches for Class II, 5-inches for Class III, and 6-inches for Class IV. This keeps them within their capacity limits for their classes. Of course, some people will need narrower forks or wider forks depending on the application.
How do you measure forklift forks?
- Measure from the front of the fork to the tip to determine the length.
- Measure from side to side to determine the width.
- Measure the thickness of the forklift's back side.