There are different types of measuring instruments used on ships and in production.

Many instruments are used in daily life.An accurate result or reading is the main purpose of the instrument.Measurement instruments are used in mechanical engineering.The Top 10 measuring instruments in mechanical engineering are going to be discussed in this article.

Vernier Caliper is a king of measuring instruments.vernier caliper can be used in many ways.

The internal jaw and external jaw are the two types of jaw.The internal jaw is used for internal measurement.The external jaws measure outer dimensions like length, width, and diameter.One jaw is fixed in the other jaw.The guiding surface helps the sliding arm move on the main scale.The sliding arm has a vernier scale attached to it.The depth blade is at the end.

For measuring different dimensions such as Length, Width, Depth, Internal diameter, Outer diameter and Internal gap.

vernier caliper is the only instrument that can measure multiple dimensions.We can measure many different dimensions with vernier caliper.

We can measure various dimensions with the help of a micrometer.Micrometer is the second most used measuring instrument in mechanical engineering.

A micrometer has a C-frame, barrel, and thimble.The inner side of the C-frame has an anvil attached to it.There is a decrease and increase in the distance between the anvil and the spindle.The Thimble scale is placed on the thimble.The rachet is at the end of the micrometer.

The Micrometer has the lowest count.Micrometer gives more accurate reading.

The height gauge is used to measure heights.The principle of height gauge and vernier caliper is the same.

Base, Scriber, Measuring Jaw, Slider, Locking Screw, Fine Adjustment screw, Vernier scale, Beam, etc.

The beam and heavy base are used for the height gauge.The beam carries something.A sliding arm moves up and down in a horizontal direction.The slider has all the other parts.The main scale and vernier scale are on the beam.

A Bevel protractor has two blades, a fixed blade and a rotating blade.The blades are placed on the faces to measure the angle between them.The vernier scale is used for angle measurement.

Bevel protractors are easy to use and are preferred by many engineers in mechanical engineering.

The standard distance between the roller and the sine bar is 100mm.After mounting the object on the upper surface, we put the slip gauge of different heights under the roller so that the two ends of it come together.We use a dial gauge to check the taper.The height of the ends comes from the surface.We find the angle after applying the formula.The formula is.

A bore gauge is a measuring instrument.We can measure bore diameter with the help of a bore gauge.

The size of each anvil is different from one another.The dial indicator is at the top of the handle after the anvil is inserted.We can take a direct reading of the bore after setting a specific pressure on the dial indicator.

When the size of the bore or internal diameter is critical, it's a good idea to measure it.

The scale is mounted on the beam.The vernier scale is one of the mounting parts that have a locking screw on it.In a horizontal direction, the slider moves up and down.The same principle applies to Vernier caliper and Depth gauge.

The Dial indicator is used in many mechanical instruments.In mechanical engineering, there are many measuring instruments that are useless without a dial indicator.

The dial indicator has a rack and gear mechanism that converts the linear motion of the plunger into the angular motion.The one revolution is the same as the one-digit on the main dial.The Main dial's position is fixed, but we can move the Magnified scale in a circular motion.

The size of a piece of work can be compared with another piece.There are two legs, spring, nut, and bolt in the caliper.We can change the distance between the legs with the help of a nut and bolt.

A number of thin blades make up the feeler.It is used to measure the gap between two surfaces.The feeler gauge has different thickness blades.Each blade has a thickness value marked on it.High carbon steel is used in the blades so that they don't compress during measurement.All blades are protected from damage by a steel case.