The new Grohe Blue Professional has a filter and a CO2 reset.
Getting up and running is easy.You can watch the video for step-by-step instructions on how to fit the GROHE Blue Professional water system.
An approved expert can come to your home or business to install the GROHE Red or Blue Filter Tap.Because of the combination of water and electrical supply, these products should be installed by a professional.
The display on the tap will light up when the time comes to replace the filter.
The GROHE Blue Professional System needs to be cleaned twice a year.
The first time you buy a CO2 bottle, you need the starterset.
You need the refillset 2Kg CO2 (or 425 gr) bottle up to 350L sparkling water for every refill.
A warm air exhaust outlet was needed at the bottom of the cabinet.Every product set has a gauge for the cut-out.
The GROHE Blue S-, M- and L-size filters can be measured with the included test stripe at your local water supplier.
When capacity is exhausted, the filter must be changed.The blue/tourquoise/green light on the fitting's left handle shows the filter capacity, which is less than 20l.The orange light must be changed.
When the CO2 bottle is empty, the Ondus app will notify you with a push notification and the affected system will be ranked ahead of all others in your control desk.The fitting's left handle will have a white light.
Release the pressure valve and connect the new bottle.Release the pressure valve from the bottle and connect the new bottle to open it.
The filter system should not be left out of service for long periods of time.The GROHE Blue filter system needs to be washed with at least four liters of water if it isn't being used for a few days.If you leave the system unused for more than four weeks, you will have to replace the filter.
The auto-flush function can be activated via the Ondus app.
The CO2 bottle should be disconnected from the system.Use the sprayhead of the cleaning cartridge to wash your hands.The Ondus app or cooler display can be used to turn on the automatic cleaning mode.
The cleaning will take 20 minutes and in the process the faucet's left handle will light up purple.The purple light will go off once the cleaning is done.The CO2 bottle and a new filter can be connected again if the cleaning catridge is removed.
The Ondus app can be used to place an order for replacement filters, CO2 bottles and accessories.
Products will be added to your storage when you order them via the Ondus app.The quantity can be edited manually.
A new system can be added to the Ondus app.The system will show up in your control desk after that.
The Ondus app can be used to create locations.Your control desk will show all created locations.
The water supply might be interrupted or the filters might not be installed correctly.
There is a humiditiy inside the cooler.Wait 15 minutes and connect the supply again.
The capacity of the filter is exceeded.The Ondus app can be used to change filters and reset capacity counter.