The cost of decomposed granite is calculated by how much it costs.

The cost of installing granite on a 400 square foot area can range from $125 to $300.If you use basic crushed granite, the cost of the materials alone is between $35 and $60 per inch.The quality of the granite and depth of coverage are the most important cost variables.The cost of crushed and decomposed granite is determined by your location and distance from the nearest quarry.

The labor cost for installing granite varies from 70 to 80 per hour.Contractors usually quote a price for the entire job, rather than the time required for each task.When you supply your own granite and other materials, contractors are more likely to give you an hourly rate.The time that contractors need to complete a project depends on the size of the project.

It takes between 120 and $240 to install crushed granite for a driveway.This figure assumes a 10 by 50-foot gravel driveway covered to a depth of six inches, which is adequate for supporting the weight of vehicles.It does not include the labor needed to level and grade the driveway, which is typically between $1,500 and $2,000.Depending on the size of the tree, clearing the ground costs between $200 and $500.

Assuming a 10 by 10-foot patio, the total labor cost of a crushed granite patio is between $400 and $700.The cost of installing granite is less than $50, but contractors will need to dig and prepare the site.It is important for a patio to be level and these tasks require a lot of labor.

For the cheapest types, the cost is between $30 and $50 per yard.The density of the material makes transportation the greatest cost variable.You will be charged by the suppliers for moving the granite to the work site.Some suppliers will charge a flat fee per mile for transportation, while others will.

The cost to cover a 20 by 20 foot area to a depth of six inches is less than $1 per square foot.The project would require 200 feet of material.If you live in an area with a lot of rain, you may need to add a stabilizing agent to the gravel.

Assuming the gravel has an average size of 12 inch, the cost for a ton of granite is between $10 and $16.The weight of a yard of 12 inch granite will decrease as the size of the gravel increases.Divide the cost per ton by the number of tons in a yard to arrive at a figure.When the gravel remains in one place for a long time, this figure assumes it isn't compressed.

$60 per ton is the average cost for crushed red granite.Granite is available in many colors, so it isn't a significant cost factor.The supplier, location, distance from the quarry and gravel size are some of the factors that affect cost.If the customer orders a full truckload, suppliers usually list the price per ton.When they have a surplus, they may sell in lower quantities at the same price per ton.

The cost of stabilizing granite is about $185 per ton.The price of this type of granite is much higher than that of simple crushed granite because the supplier has to mix a stabilizing agent with the granite.The granite needs time to break down.

Once the gravel is on site, the process of pouring and smoothing doesn't require much skill.A gravel driveway installation near you is required for the challenging aspect of projects involving gravel.You should leave the removal of mature trees to the pros.

The weight that the surface must support affects the depth of the granite.The driveway should be about six inches deep.It will take at least two inches of gravel for a surface that people will walk on regularly.

It should last seven to ten years before it needs to be replaced.It depends on how tightly packed the granite is and how often your location gets heavy rain.The length of time the site will retain the granite depends on the slope of the surface.

A yard of gravel will cover 54 square feet to a depth of six inches.The figure is for the depth at the time of installation.Gravel suppliers recommend that you reduce this coverage by 15% when estimating the stable depth.