If the ground is not level with an above ground pool, it is possible for it to become unsafe.
Many people buy above ground pools because they are cheaper than in-ground pools.It raises the question of how unlevel an Intex pool can be.Some above ground pools have inflatable rings.It is important that the installation is done correctly.
All above ground pools have a flat space covered in grass or sand.It will be very unsafe if you install it on anything else.How can an above ground pool be unlevel?Read more to find out.
The foundation is usually the biggest mistake in pool construction.Many people leave the groundwork unlevel, soft, rocky, and rough, even though it is the most important part of the process.
Some people don't remove the sod, they just build a pool on top of the grass.This is a large and costly mistake.
It can be difficult to level a pool.It is a challenge to level every pool in every place.Despite their high level of knowledge and professional equipment, most installers don't get better than a 8th of an inch for a round pool and a 14 of a inch on an oval pool.
The majority of instruction manuals for above grounds are useless.They say to level the pool to within an inch if they mention leveling procedures.A pool being off by a full inch is fine and will not cause any major structural issues, but you may notice it is off level at the waterline.
It is going to look slanted if the pools are unlevel by more than an inch.You can see the difference from the outside of the pool if it is two inches off.Sometimes it can be hard to tell if the yard is flat, but at two inches the mind will see that something is not right.
You can live with it being two inches off because it won't cause structural issues.It is unacceptable to have more than two inches.
No one should be swimming in pools that are more than three inches off the ground.The pool looks bad and will eventually be pushed out of shape because of the unbalanced wall.
The pool will collapse under the pressure.The above ground pool needs to be leveled and reinstalled if it is more than three inches off the ground.
Keeping yourself and others safe while swimming is important.If you want to install a pool, be sure to look for an area away from trees and architecture.
Sand can be used to make a well-packed base for the pool.If you don't have a level area, you need a professional to level it for you.A level pool will last longer than a pool that has not been properly installed.
The walls will collapse if an Intex pool is installed on an even surface.The pool will blow out due to the water pressing against one section of the pool with more force than the rest.
The pool will cause property damage and injury to anyone in or around it.The inflatable ring pools are more likely to blow out and cause major damage if they fold under the force.The most well-constructed pool can fail if the leveling is off.
Even the most well-constructed pool can fail if the leveling is off, because inflatable ring style pools are more likely to fold under this increased force.
An even pool will result in an even water level.It won't seem like a big deal but over time it will become one.Once the pool settles, the difference will increase and a half an inch will become a few inches.
A deeper side can be dangerous for small children and people who are not strong swimmers.If your pool has a skimmer, it will stop working if the water level is too low.The water that your family swims in will not be sanitary, so be careful that the skimmer doesn't end up on the low end of the pool.
The liner is not going to lay flat if you choose an even area for your pool.Many items will tear and rip the liner.
Pool vacuums will not be able to clean the bottom of the pool before the liner is torn.They will ruin it.