How to Use Glazing Putty on Metal Surfaces is one of the topics on The Craftsman.
There are a lot of options when it comes to finding the right window glaze.Depending on the window and where you are looking, a lot can happen.
I have put together a list of my favorite window putties to help you find them.All of these putties will help you get the job done right, it just depends on your personal preferences and situation as to which will be the best for your project.
If you're interested, you can purchase the links for each one.If you decide to buy the sarco putties on The Craftsman, I will give you a small commission at no extra cost, but don't buy unless you think it is the right one for you!
Most of the time, my shop uses the most common glazing putty that professional window restorers use.It is easy to use and has a smooth finish.In most conditions, the putty is ready for paint in as little as 3-4 days.It is only recommended for wood sash and not for steel windows.As long as I get it painted in the 3-6 day range after application, I have had good success using it outside.This is my favorite substance.
One of the most versatile varieties of Sarco's putty is the dual glaze.This is the first thing I have learned to use.It can be applied to wood or steel windows outside or in a shop.It's a good choice for spot glazing touch ups outside.It is a little messier to work with on hot days because of the oilier nature of dual glaze.It takes a long time to cure.The putty stays flexible longer than most of its competitors because of the slow curing.
One of the reasons I think so many people use DAP 33 is that it is available at almost every hardware store.It was easy to find when I started my business.It was just as easy to work with as Type-M.The curing time until it was skinned over and ready for paint was closer to dual glaze in the 2 week range, which was one of the reasons I stopped using it.It is neither here nor there for me.
Aqua Glaze is an alternative to the other oil-based putties.For special circumstances, I keep a can of this around the shop.Aqua Glaze has a fast curing time.It can be ready for paint in less than an hour.If you are in a time crunch, this can be a big help.It is the most difficult to work with.It can be pretty sticky if it is not mixed thoroughly.It is important for those special cases.
I tried a gallon at a friend's request and it worked well.I feel comfortable putting it on my windows because it has been tested enough.It looked like Glazol was in the middle of Type-M and DAP 33.It was ready for paint in about 4 days, but it was a little chalkier than I was used to.
The Allback is the most traditional of these putties.If you want to be like the old school way, this is the way to go.It is made mostly with water and a purified oil that has been removed from linseed.Allback is pure as snow.It can be painted immediately if you use a linseed oil paint, which is a major time saver.It is expensive.
To learn how to repair old wood windows, visit my resource page.
I like working with my hands and teaching others how to do it themselves.Everything can be taught if you only give it a chance.
Can you tell me if windows need to have putty applied to the inside as well as the outside?Thanks.
I have no idea what the term is for my windows.The panes are held in with wood trim.The glass may have been sealed to the wood.What is the ideal compound for this use case?
It got a rating of 5 out of 10 because it is terrible.I don't want to say it's not there.It isn't very good since so many people use it.My review is all about my opinion.
There is a distinction between working in a shop and outside.Can you tell me more about this?Is it just a case of painting quickly?
There is a local company that makes a professional linseed putty that takes a month to make and another that skins it in 2 days.Would they be the same?
Some putties should not be exposed to sunlight while they skin to keep them from drying out.For long term exposure, all putty should be painted.
I put the glass in before painting the windows.I will need the putty to stick to the wood after I put the glass in.Will any of these putties work?
There is a storm door on the front of the house that has glass panes.There is a compound between the glass and the panes that is falling out.It is flexible and black in color.Is that what it was?Is that what I should use to refill the gaps?
I used the wrong compound in the process of making a pine loft bed, what can I do?Is it possible to remove all the Glazol from the knot holes?I would like to paint the bed with Shellac before it is stained or painted.
Can the oil base stained glazing compound be used to match the stained wood frame on the inside of a traditional window sash?
I have old windows.The putty is hard as a rock and missing in some places.I am afraid I will break the glass if I remove the old putty.I go over the old putty with new if I fill in.Which product do you recommend?
Do you sell dual glaze or Austin's putty in your store?I have three 9:1 windows that need to be reglazed.
Do you want me to tell you if I like the putty I worked with?Ha!Austin has Glazier's Putty all the way.
I have the sarco type m putty and would like to know how to tint it to match the wood.I am restoring an old cabinet with glass doors and will be using a type of shellac called garnet.
I talked to a man at Sarco and he said the shellac would be fine to use over the putty once it's over.I thought it would be safer to prime the rabbet with an oil primer first since the shellac is not dewaxed.He thought the problem wouldn't be a problem either.What thoughts do you have on either of these?Many thanks.
I have the same situation with casement windows with diamond grids, they all need reglazing.I read on the historic window restoration site that they used contemporary glazing tape instead of traditional glazed windows.Advice is greatly appreciated.Sori, thank you.
Bob Yapp recommends using UGL Glazol, but with pouring out the oil that comes to the top and mopping up the rest with a paper towwl, and then adding/kneading in boiled linseed oil as needed.It was easy to set and work with and can be used in place after taking his class.He has been doing this for a long time.
There is a detailed discussion of different type of window putties.