Water heating systems using glow worm boilers are useful.If you are going to install a Glow Worm boiler in your home, you can learn how to use it safely.If you read the owner's manual, you'll be able to use your boiler.You can always contact a professional home technician for advice if you have any concerns.
Step 1: Before using the boiler, read the instruction manual.
The boiler's instructions should be read completely.To make sure you don't use the boiler recklessly, pay special attention to the safety section.If you want to check the drain pipes for obstructions or add water through the filling cock, you should read the instructions manual first.
Step 2: A technician will install the boiler.
The installation and maintenance of your boiler should be done by a professional.Hire a technician who knows how to install hot water boilers.Do not do any repairs on your own.Hire a professional to fix your boiler.To find a professional technician, contact repair people with experience installing boilers.You can find a suitable technician on Glow Worm's website.
Step 3: If you smell a gas leak, you should leave your home.
If your boiler is damaged, it can leak gas.When you are in a safe area, leave your home and contact the gas supply company and emergency services.Professionals should make sure that the home is safe before reentering it.The smell of natural gas is similar to sulfur.
Step 4: If the pressure falls below half a bar, add water to the boiler.
Look at your heating system's filling pressure on your boiler display.If your system works correctly, this should be between 0.5 bars and 2.7 bars.Remove the filling cock's lid and fill the heating system with water in small amounts until it reaches the desired pressure.The filling cock is a metal spout that can be found under the boiler box and near the pipes.Add more water to the heating system if the water pressure is less than half a bar.
Step 5: If the pressure is more than 2.5 bars, call a professional to drain the boiler.
Your boiler's safety and efficiency can be affected by a reading above 2.7 bars.A professional technician can drain the boiler if the filling pressure is too high.Don't use the boiler until the professional has drained it, if you notice high heating system pressure levels.
Step 6: During cold weather, keep the boiler on.
The boiler can be turned off in cold temperatures, which can cause frost or other obstructions.If you have to turn off the boiler for a long time, you should have a professional inspect the system.If the pipes freeze, you should hire a technician to fix it and not use the boiler until they do.
Step 7: The isolator device is in your boiler.
When you have your home technician install the boiler, they should show you where the isolator device is and how to open it.Depending on where the technician installed it, the isolator device is a grey rectangular box.You don't need to learn how to open the isolator device on your own.Talk to your professional technician, who can help you with the isolator device for the first time.
Step 8: To operate the device, turn the boiler's main switch on.
The main switch installed by the technician will turn the boiler on once you've opened the isolator device.The switch is labeled "on/off"When you're ready to use it, turn the switch on.
Step 9: The hot water temperature needs to be adjusted.
The main display has the boiler's temperature connected to it.To turn the temperature up or down, hold the display's "mode" button down and use the "+" and "-" buttons.If you want to burn your skin, don't turn your water temperature hotter than 120 F.
Step 10: If there are obstructions in the drain pipework, contact a professional.
If the drain pipework is not clear, your boiler will not work.Below the boiler box is the drain pipework.If objects are blocking the drain and preventing water from coming through, it's time to inspect it.Contact a professional to fix your boiler if you notice any problems.Don't try to clear the pipework yourself.It has to be fixed by a professional.
Step 11: An annual boiler inspection can be scheduled.
A technician will inspect your boiler once a year.They can make any repairs or replacements for the product if needed.If you notice damage to the boiler, you should have a technician fix it as soon as possible.
Step 12: It's a good idea to clean it with a solvent-free soap.
Cleaning your boiler will help it last a long time.wring the cloth until it is damp after dipping it in a solution of water and solvent-free soap.To clean the boiler's surface, wipe the cloth over it.If you prefer, you can clean the casing whenever it looks dusty.The cloth shouldn't be wet or dripping.
Step 13: Don't use chlorine-based cleaners on the boiler.
Don't use sprays, soaps, or other cleaners that contain chlorine to clean the boiler.Chemical reactions with the boiler can be harmful or even deadly.To make sure the cleaner is chlorine-free, inspect the instructions thoroughly.