How To Solve the Lnk File Extension Problem in Windows
LNK is a file extension used by the Microsoft Windows operating system.It usually gives a direct link to the file, without having to navigate to it.Sometimes a Windows registry error can cause your files to be converted into ones with.lnk extensions.There are many ways to solve the LNK file extension problem.
Step 1: The registry fix is for Windows.
A failed Windows Update, missing files or corrupted files are usually what causes.lnk extensions to fail.This problem can be solved by running.lnk file association fixes.For Windows 8, Windows 8.1 and Windows 10, you can download the File Association Fixer.Windows 7 and both 32-bit and 64-bit are supported by the tool.Go ahead and choose the right file for your computer.The.lnk File Association Fix can be downloaded directly for Windows 7 and Vista.The.lnk file association fix is for windows vista.The link will download the fix for the problem.
Step 2: The fix for the registry should be run.
Double-click on the fix if you don't already have it.The fix will be run by this.You will need to unzip the.ZIP file if you downloaded it.Click on it if you want to save its contents to a location on your computer.
Step 3: The.lnk file repair tool can be used.
The tool is free of charge.All versions of the Windows operating system are supported by this tool.Click the file to open it.Click the start button.The tool will be run automatically.
Step 4: Wait until the process is done.
Allow time for the prompt from the registry editor.
Step 5: You should restart your PC.
The changes you made to the registry will be saved when you restart your computer.Click on the button.You can choose the restart option from the "Shut down" tab.This will restart the computer.
Step 6: Click the start button.
The System Restore feature is offered by Windows.The feature allows users to go back to a point when their computer was working well.The tool will uninstall programs that were wrongly installed without affecting existing files.There is a way to do a system restore.
Step 7: The access system needs to be restored.
You can type "System Restore" in the search box.
Step 8: Click on the option that says System Restore.
The wizard will be run by this.
Step 9: You can choose a restore point.
You can restore your system to an earlier date.The most recent restore point will be selected by Windows.If you want to show more restore points, tick the box.This can be found at the bottom left corner of the screen.Click next.There is a list of points on the screen.The restore point will have a description.Pick your restore point.Click on the restore point to make a choice.The wizard will confirm your decision.You should confirm your choice of restore point.Click on the option to finish.Click "Yes" for the wizard to restore your system.It will take a while for the wizard to complete the restore.Wait for a prompt that the restore was successful.
Step 10: The restore should be tested.
To confirm that the restore was successful, restart Windows and work with it.If some previously installed programs are still malfunctioning, you may have to install them again.
Step 11: You can download the latest version of the program.
Sometimes a computer virus can cause a.lnk file extension problem.One of the most popular anti-malware programs is Anti-Malware.There are programs that can be easily detected and removed from your computer.
Step 12: Click on the file.
The software will be installed on your PC.
Step 13: The software needs to be setup.
The setup process requires you to follow the onscreen instructions.Don't change the default settings.If the software has been installed, make sure that you tick both the "Update Malwarebytes' Anti-Malware" and "Launch" boxes.
Step 14: Click to finish.
This will end the installation process.
Step 15: Don't restart the computer.
Do not restart your system if you are prompted to do so.
Step 16: To avoid paying for the service, select "Malwarebytes free"
If you only want to use the on-demand scanner, you will be prompted to sign up for a trial period.
Step 17: It's a good idea to run the Anti-Malware Scan.
You can perform quick scans on the Scanner tab.
Step 18: Click the button.
The computer will be scanned for malicious files.A message box will appear once the scans are over.
Step 19: Click OK.
You can see a list of the infections that the software detected on your computer.
Step 20: The infections need to be removed.
Select the corrupted files by checking all the boxes.Click on the button that says Remove Selected.All the malware will be removed by anti-Malware.
Step 21: In Normal mode, restart your PC.
Anti-Malware will prompt you to restart your computer once it is done.Reboot your PC after accepting this prompt.Your changes will be put into effect by this.
Step 22: Click Start.
You can either restore the registry key from another computer or replace it on your own computer.The Start Menu feature is not supported by Windows 8.There are tips on restoring the Start button.
Step 23: Go to the search box and type regedt32.
There is a list of files in the search menu.
Step 24: Click on it.
The file will be opened with this.Click on the program to open it.
Step 25: You should start the registry editor.
To start working with the registry editor, click Yes.
Step 26: HKEY_CLASSES_ROOT is located in the subkey.
The root file needs to be found first.The.lnk folder is listed under it.
Step 27: The file should be edited.
You can go to the Edit Menu.Click on the Edit menu if you want to modify your registry on a different computer.The file is called the.lnk.Click to remove it.This will remove it.You should save your changes.You can click on the menu.You can save your changes by hitting the Save key.You can copy the file onto a disk.You can copy the entire file onto a disk or pen drive once you have saved the changes.The registry key can be recreated on your computer.To get to HKEY_CLASSES_ROOT, follow the steps on your computer.
Step 28: Click to add a key.
Step 29: The new key needs to be named.
Without quotation marks, type ".lnk" as the key name.The Class box needs to be blank.
Step 30: The Add Value box needs to be changed.
Click to add value.The value name box should be blank.
Step 31: Without quotation marks, type "command".
Step 32: REG_SZ can be found in the data type list.
Step 33: In the editor box, type "lnkfile" without quotation marks.
Step 34: Click OK if you don't want to.
Step 35: You can type "ShellNew" without quotation marks.
Click to add a key.Then type in "Shell New".The Class box needs to be empty.
Step 36: In the Data name box, click REG_SZ.
Step 37: The string value can be typed without quotation marks.
Step 38: The registry should be restored.
You can choose the new key.Go to the registry and click Restore.Select the file you saved on your disk or pen drive.
Step 39: It's time to restart your computer.
The button on the Registry Editor is X.You will leave the program.Reboot your computer to make your changes.
Step 40: Try your changes.
You can test a program menu.Changes have been made successfully if it works well.