How to reset the tire pressure monitoring system in a Dodge Grand Caravan.
A properly formatted TPMS Scan tool may expedite the relearn process.
1.There is a pre ssure listed on the placard.2.For the system to learn new sensor IDs, drive the vehicle for at least 15 minutes at a speed of 30 MPH or more.It is possible that the vehicle will need to sit for up to 20 minutes before driving.
All tires should be inflated to the pre ssure listed on the placard.2.The first thing to do is to use a properly formatted Scan tool to check the tire.3.The ignition needs to be turned to the ON position.4.The Scan tool needs to be connected to the vehi cle.5.The ignition needs to be turned off.
A properly formatted TPMS Scan tool may expedite the relearn process, however no special tools are required.
1.Pressure is listed on the placard.2.Allow the vehicle to sit off for 20 minutes.For at least 10 minutes, drive the vehicle above 15 mph.It may take from 10 to 35 minutes to relearn.The TPMS light will be turned off when the vehicle learns each sensor.