How to remove a patio door screen and adjust it.

You don't need to remove the patio door screen.To remove your patio door screen, follow our instructions and watch the video below.The process should take 10 minutes to complete.

The door screen needs to come off of the rollers in order to be removed.There are screws at the bottom of the screen.The screw counter should be turned clockwise to raise the screen until you see the head of the screw.On the other side, repeat.

The wheels are on either side if you raise the screen slightly.Put the knife under the wheel and push in and lift it.You can slide the screen towards you once the wheel is up.The screen is removed if you do both sides.

Line up the top two wheels in the track and push the screen up as high as you can.Push the wheel up with the knife and slide the screen back into the track.On the other side, do the same thing.

Before using the screen again, it is important to adjust the rollers.Turn the screws clockwise until you can see the screen coming back into the track.On the other side, repeat.

There is a plastic bag on the screen door handle.The door latch should be adjusted to its lowest position.

If you want to make sure the screen door is lined up correctly, you need to put a mark on the door frame that is level to the bottom of the handle tab.The point of the keeper should be located at the lowest point.

Attach one screw to the bottom hole with your head screwdriver.The screws are about 14” apart.

When the screen is re-installed, make sure the keeper is still in the optimum location.The first screw can be loosened to adjust it.The keeper can be moved if you need it.

Learn how a couple turned a dark and outdated kitchen into their favorite room.There is a moving glass wall system.