How to program a DISH remote control
You can find the steps to program or reset your DISH remote control here.We can help you click in no time, because we have used and researched the DISH remote for hundreds of hours.
The process below can be used to program all of the DISH remote models from the last several years.If you have an older model, use the steps below.
Unless noted, all actions are performed on your remote.You don't have to mess with any other remotes or fiddle with your devices.We like to keep things simple.
If everything goes according to plan, you should be happy!For all the devices you want to pair with your remote, repeat the above process.
You can try a different code if you encounter a problem.Multiple codes can be used to program your DISH remote to your TV model.
We can help you find the best internet service to bundle with your DISH TV service.
If you have an older remote control from the 20 or 21 series, you will have to do a power Scan.
The power scans device codes until it finds one that works.The steps for programming an older DISH remote control can be found here.
If everything works, well done, friend.You are all set.You are good to go if you repeat this process for any other devices you want to program.
And that is all!Now that you have set up your set-top boxes and Hopper 3 DVR, you should be able to control them with a single remote.
Good question.If you have thrown out the documentation that came with your equipment, you can compare it to the images on this page.
The appearance of each remote makes it easy to determine which one you are working with.
If you need to pair a new remote with your Hopper 3 or Joey, follow these instructions.
You can re-link your remote to your receiver if you want to.Here is how you do it.
It depends on whether your remote falls under warranty or not.You can ask for a replacement at DISH's customer support page.
The side of your remote has a button for TV.The remote knows you are trying to control the TV.