You can learn how to pair a headset with a computer.The steps to pair your headset or earbuds will be different depending on your operating system and headset model.Before attempting to pair, make sure the Jabra is charged.
Step 1: Put your headset in pairing mode.
The steps vary by model.Supreme UCMS: With the headset powered off, press and hold the Answer/End button as you flip the boom-arm open.Lift your finger to see the blue light.The On/Off/Pairing switch will flash blue if you slide and hold it.With the right ear bud turned off, press and hold the Multi-function button until theLED flashes blue.Power the earbuds on and then press and hold the left and right buttons at the same time.Press and hold the button on the right earphone until the blue light comes on.
Step 2: Open the settings on your phone.
The gear icon can be found on the home screen or in a folder.
Step 3: Go to the app and tap it.
It is at the top of the menu.
Step 4: The switch should be on the On position.
You can skip this step if the switch was green.Your iPad or iPhone will detect available devices once they are enabled.
Step 5: You can tap your headset.
Under "Other Devices" is where it should appear.This works with your headset.You'll find it under "My Devices" if you've used it before.
Step 6: Put your headset in pairing mode.
The steps to do this are different for each model.Supreme UCMS: With the headset off, press and hold the Answer/End button as you flip the boom-arm open.Lift your finger to see the blue light.The On/Off/Pairing switch will flash blue if you slide and hold it.With the right earbud turned off, press and hold the Multi-function button until theLED flashes blue.Power the earbuds on and then press and hold the Left and Right buttons at the same time.Press and hold the button on the earphone until the blue light comes on.
Step 7: Open the settings on your phone.
Step 8: You can tap connected devices.
This may be called on some phones.
Step 9: You can tap connection preferences.
Skip this step if you don't see this option.
Step 10: The switch should be on the On position.
There is no need to make any changes if the switch was already enabled.
Step 11: If you want to pair a new device, tap it.
If you don't see this option, you can scroll down to see if your phone is displaying available devices.There is a three-dot menu at the top-right corner of the page.
Step 12: When it appears, tap your headset.
The name of the device may have the word "Jabra" in it, but also show the model number.Your phone will be connected to your headset.
Step 13: Attach your headset to your body.
The steps vary by model.Supreme UCMS: With the headset off, press and hold the Answer/End button as you flip the boom-arm open.Lift your finger to see the blue light.The On/Off/Pairing switch should flash blue three seconds after you slide and hold it.With the right earbud turned off, press and hold the Multi-function button until theLED flashes blue.Power the earbuds on and then press and hold the left and right buttons at the same time.Press and hold the button on the right earphone until the blue light comes on.
Step 14: You can click on the Notifications icon.
The chat bubble icon is to the right of the system clock.
Step 15: If it's not already on, turn it on.
It's already turned on if the tile says "Not Connected" or another name.
Step 16: The connect tile is on the menu.
It is below the tile.This searches for nearby devices and displays them in the menu.
Step 17: Click on your headset.
The headset will connect to Windows.
Step 18: Attach your headset to your body.
The steps to do this are different for each model.Supreme UCMS: With the headset off, press and hold the Answer/End button as you flip the boom-arm open.Lift your finger to see the blue light.The On/Off/Pairing switch should flash blue three seconds after you slide and hold it.With the right ear bud turned off, press and hold the Multi-function button until theLED flashes blue.Power the earbuds on and then press and hold the Left and Right buttons at the same time.Press and hold the button on the earphone until the blue light comes on.
Step 19: Go to your phone and turn it on.
The menu bar at the top-right corner of the screen has an icon that looks like a sideways bowtie.If you don't see this icon, you can click the Apple menu, select, click and then select "show bluetooth in menu bar."There's no need to change anything if it says "Turn Bluetooth Off".
Step 20: Select System Preferences after clicking the menu.
There is a menu at the top of the screen.
Step 21: Click on it.
You will be able to connect to devices on your Mac.
Step 22: Click connect if you want to use your headset.