How to paint over a fiberglass shower surround, HunkerHow to Paint a Shower Base, Home Guides, SF Gate, and more.
It's common for a shower surround to be made of fiberglass.An older fiberglass shower surround may look newer and more appealing with a fresh coat of paint.This is a cheaper way to replace your shower surround.Correct steps and proper preparation can help you paint over a fiberglass shower surround.
You will need the fiberglass paint of your choice.Make sure the paint you buy is suitable for fiberglass.
It's a good idea to purchase a bonding agent separately from the fiberglass paints that claim to include a primer.You will be able to apply your fiberglass paint more evenly.It will make your work last as long as possible by boosting the adherence of your paint.
You need to make sure you have adequate safety gear when painting fiberglass.To protect your respiratory system and skin from any harsh chemicals, you'll need to wear a mask and gloves.If you want to keep the room wellventilated, open a window or use a vent fan.Closed-toe shoes and long sleeves are required for the job.To protect your taps from being painted, you'll want to cover them with masking tape.
The first step in painting a fiberglass shower is deep cleaning the area.You can use a bathroom cleaner and a sponge to clean your shower surround.
Sandpaper is used to rough up the shower surround.After sanding, wipe down the surface to remove any dust.It's a good idea to dry the area thoroughly before moving on to the next step.
To make sure your tub is as dry as possible, you should wipe it out.Your paint can be affected by leftover water.The edges of your tub and shower stall should be covered with tape.Apply your primer.Allow enough time to dry and then sand the fiberglass shower surround surface to make it stick.
The best way to finish a fiberglass surface is with spray paint.A paint roller and a paint can can give the same results.If you're painting with a roller, use long, slow strokes to minimize dripping.