How to open a bathroom door twist lock is one of six ways to learn.
After walking out to see off your kids, you realized the door was closed and your keys were still inside.You rush to the bathroom to see your 6-year-old locked up when you hear his screams, because you were busy with your work.It's doable, right?
There are many times in our lives where we end up at the wrong side of a locked door.Most locks can be picked with easily available items at your home, so don't call the locksmith yet and get charged with a hefty sum.
Most locks are simple mechanical devices.This guide will show you how to use simple household items to open a bathroom door twist lock.
Identifying the type of lock you are working on will help you pick a lock.Privacy door knobs, also known as bathroom door twist locks, have either a pushbutton inside the door or a twisting lock mechanism.There is a small hole in the center of the doorknob to allow emergency access.
Determine the type of lock mechanism you are working on and check if there is a hole at the outside of the door.This will let you know which method is best for entering the locked door.
The interior door in a house is locked for privacy but is not designed to be very difficult to open.There is a small hole on the non-locking side of the door.
A small button will be pushed to open the door.The only thing required is a stiff, straight tool which can be a small paperclip.We don't know why anyone would still have the key.
You need to twist the locks with the tool.The tip of a paperclip is flat, so you might be able to hammer it with a screwdriver.If this still isn't clear for you, you should use a spam key all the time.
The bathroom door twist lock is designed for a lower level of security.The method is to disassemble the lock.Most knobs need aPhillips head screwdriver, though some have obvious mounting screws.
A series of pieces will be removed on others.Before getting to the actual screws.A flathead screwdriver can be used to help you release the mechanism which is holding these extra pieces in place.
A latch bolt is the mechanism of the lock.The bolts that are spring- loaded have an angle in the faces away from you so a wire hanger can be hooked with it.
Making a hook with a long handle is the first step.The hook should be placed between the edge of the door and the jamb.The goal is to get the bolt around.
You can place the hanger in the correct position by holding it with one hand and the doorknob with the other.The knob will turn if it is unlocked.
When the door is forced to withdraw, the knob will turn and open it.The gap between the wall and door will not be blocked by this.
It is possible to pop the lock using a credit card if it is a latch bolt.If you don't have a credit card, use a flexible plastic card as it may get damaged in the process.
The principle technique is the same, but here the edge of a credit card will be sued to push the latch bolt.Put pressure on the knob if you repeat the steps mentioned in the coat hanger technique.
Even if the access is blocked, the flexibility of the card will allow you to bend and wiggle it in the gap.