The costs of replacing razors and blades can be a hassle.A typical disposable razor blade only provides a close, smooth shave for 10 days to 14 days, a fact that greatly influences how manufacturer's price razors are.They compete by taking a loss on the razors so they can mark up and make more money.Consumers can save money by keeping their razor blades clean and sharp.A few quick fixes will protect your blades.
Step 1: After every use, clean the razor.
Give the blade a good scrubbing with soapy water if you don't already do so.Using an old toothbrush, scrub across the blade a few times to remove any leftover skin and hair before rinsing it in water.
Step 2: After each use, dry your razor.
To let a razor blade rust is the fastest way to wear it.There are tiny particles of rust on the metal blade when it oxidizes.You may not be able to see them, but they affect the blade.In hard water areas, if you let the water dry onto the blade, you will get a close shave.The razor needs to be dry on a towel.You should not wipe it with the towel because it will dull the blade.Remove the razor from the dish of rubbing alcohol.When alcohol hits the air, it will cause the water to evaporate.It also makes the blade safe to use.
Step 3: The razor should be kept in a dry place.
You will lose the purpose of drying your razor if you stick it in the humid shower or next to the sink.If you want to keep the razor in a plastic bag, store it away from both possibilities.You can either put it in a cup with leftover beads ofSilicon gel in the bottom or in your freezer between uses.
Step 4: It is possible to prevent your razor blade from rusting by coating it in oil.
Oxygen in the air can cause rust on your razor blade.A barrier between the metal blade and the air will be created by coating it in oil.You can choose from a variety of household oils.
Step 5: You can use oil on a rag or cotton ball to wipe your razor blade.
The blade should be completely coated.It will defeat the exercise if the film is rubbed off.
Step 6: The razor should be soaked in oil.
Some of your oil can be poured into a small saucer.Remove the razor and put it down to dry on a paper towel after you're sure the blade is completely coated.
Step 7: The razor should be stored in oil.
Some people store their razors in oil.Put some oil in a cup.After you use your razor, dry it and put it in the cup of oil.When you're ready to use the razor again, keep the blade submerged.
Step 8: The razor blades should be adjusted between uses.
You can use a quick strop to make your blades last longer.It's not possible to use a traditional sharpening tool on modern razor blades, but you can buff them straight again with simple materials such as denim.
Step 9: You can shave in the reverse direction if you push the razor along a denim surface.
The cross-fibers of the jeans keep the blades sharp for longer.