It can be hard to be productive when you have a baby.That's where a sling comes in.It is possible to keep your baby close while you get things done.Making your own baby sling is a great way to save money and personalize your baby's carrier at the same time.We're here to help you make this project a reality.
Step 1: The sling should be made of fabrics that won't tear or stretch.
It is important that the material you use is strong enough to support your baby's weight, and that it is not too hot.Make sure your baby's skin is not irritated by whatever you use.Soft denim is an excellent choice.It will lose its shape as you use it, so it might not hold your baby safely.Flannel, muslin, and quilting fabrics are not strong enough to support a baby.Pick a fabric that is fun and matches your personality.If you're really smart, you can buy extra material to make matching clothes for your baby.
Step 2: You need to gather at least 2 yd of fabric.
You'll need between 2 and 2.5 yd of material that's at least 36 in wide.If you're plus-sized, add 18 in (46 cm) of material for every size above a US large to ensure you get a comfortable fit.
Step 3: The rings are designed for a baby sling.
If you want a ring that is strong enough to hold your baby's weight and is made of materials that are safe for a baby, you should order it online.Buy rings with a diameter of 2.5–3 in and a thickness of.25–.5 in.The larger the rings, the thicker the fabric.You can buy 3 in rings at a hardware store if you make sure there aren't any rough welded edges.Don't let your baby put them in their mouth because they may not be made of a baby-safe material.
Step 4: Stitch the end of the fabric through the rings.
Place your sling fabric in front of you.Stack the 2 rings on top of each other and slide one of the short ends of fabric through them.If you'd like, you can fold the fabric over and pin the layers together.If you want to support your baby's weight, you should use multiple rows of stitches.
Step 5: The sling can be looped through the rings.
One end of your sling will have rings sewn onto it, and the other won't.You can drape the ringed end of the sling over one shoulder, then bring the remaining fabric behind your back, under your arm, and across your chest.Pull the fabric through the rings from the bottom.The fabric should be under the bottom of the second and the top ring.Wrap the fabric as flat as you can, don't let it twist or bunch up.The lower hem should be snug against your chest and the top hem loose if you adjust the fabric.
Step 6: Put your baby in the sling first.
Carefully lift your baby, then slide them into the pouch so the fabric stretches from knee to knee, and then bring the top up all the way to their neck.The sling should be snug around your baby if you pull the slack fabric toward the ring.To make sure your baby is comfortable and secure, double-check that their knees are higher than their bottoms.
Step 7: For a no-sew ring sling, loop one end of the fabric through 2 rings.
Place your fabric on top of the sling rings.The short ends of the fabric should be moved through the rings.Place the rings in front of one of your shoulders, then bring the material around your back, under your arm, and across your chest.Wrap the free end of the fabric over the top ring and under the bottom ring to secure it.It's important to use rings that are intended for a baby sling.The diameter of these should be 2.5–3 in.Wrap the fabric under the rest of the sling to keep it short.The weight of the fabric will hold the rings in place, depending on the material you're using.It could slip free if you make it too short.Extra security is added to very thin fabrics by wrapping the short end through the rings twice.
Step 8: The fabric should be secured with a knot.
Pull the shorter side of the fabric over one of your shoulders.Wrap the longer side under your other arm and put it on top of your shoulder.The same as the first knot you make when tying your shoelaces, pull the longer side up over your chest and tie it with two overhand knots.Take the fabric out of your chest and put your baby high on your shoulder, then slide it under their back.If you want the fabric to be snug around your baby, tighten the knot after they're settled.The sling should be wrapped all the way under your baby's knees and up to their neck.
Step 9: Tubes are created out of 3 shirts.
To make a tube out of the body, cut each shirt horizontally under the sleeves.Put on 2 of the tubes and they will go from your shoulders to your sides.You should wear 1 tube on each shoulder.Pull the other tube over your head and wrap it around your belly.T-shirts need to fit on your body, so make sure they aren't stretched out or torn.If you have tube tops, you can use them as well.
Step 10: The baby's legs have criss-crossed tubes.
Pull the 2 shirts away from your body when you lift your baby up onto your chest.Put your baby in the fabric and cross the sash through their legs.The material should form an X under your baby's diaper and up their back.Once your baby is secured, pull the extra tube up from your waist and stretch it out over their back.Extra support will be provided by this.
Step 11: Yes, as long as you wear it correctly.
If your baby is not properly placed in the sling, it could be fatal.You can kiss your baby's head if you keep the sling tight on your chest.As you wear the sling, make sure your baby is upright and never curled in a C-shape.Their chin should not rest on their chest.To make sure you can see your baby's face and that their mouth and nose aren't covered, check often.If you have to pick something up not at your waist, bend with your knees and support your baby with one hand.Keep your baby's back supported with their tummy and chest against you.