Unless the glitter is applied correctly, the glue and glitter will peel off.There are many ways to get around this problem, some easier than others but all within your ability.This article will show you how to apply glitter.Your piece will not hold up to a lot of washing and will still be fragile.
Step 1: Pick a glass object.
You can make a lot of things out of glass, such as mason jars, cups, and wine glasses.Don't choose something that will be going outside or have a lot of sharp edges.It's important to keep in mind that glittered glass is delicate, so something that will be going outside or heavily used is not a good candidate.
Step 2: Use soap and water to clean the glass.
Warm water and dish soap can be used to wash the glass.After rinsing it off, wipe it dry.The glue and glitter won't stick if there are no surface dust and dirt.For store-bought items that look clean, it's a good idea.
Step 3: Rub alcohol on the surface.
Rub alcohol on a cotton ball and wipe it down.The regular washing doesn't get rid of oil and other gunk.The glue and glitter won't stick if the oils are left on the glass.
Step 4: The area you want glittered should be masked.
If you want the whole object glittered, you don't need to do this.If you are going to glitter a cup or wine glass, you need to leave the 1/3 inch un-glittered.It is possible to create delicate designs with the use of glass stencils.If you want the whole object glittered, use stickers.Cold designs, such as stripes and zigzags, can be created using masking tape.
Step 5: If you want to use etching cream on your design, consider it first.
It will be difficult to get glue to stick to glass because it is a very smooth surface.It is easier for the glitter to stick when the surface is rough.It's great for small designs, but not perfect in larger ones.The basics are listed below, but different brands have different instructions.Use a popsicle stick to apply the cream.Wait for 5 minutes.The cream should be removed from the sink.If you have a porcelain or glaze sink, use a bucket.The design needs to be dry.
Step 6: Put some glue in a dish.
Glue used for glass and ceramic projects is the best for this.The finished piece will not be as durable as Decoupage, Mod Podge, and similar types of glue.Do not use tacky glue, school glue or basic white glue.They will not last very long.
Step 7: To apply glue to your design, use a foam pouncer or similar foam brush.
If you can, don't use a paintbrush, it's more likely to leave behind visible streaks and strokes.Wait for the glue to dry before applying a second coat.The first coatprimes the surface while the second coat glitters.If you are working on a large area, apply glue to a small patch first.The glue will not dry by the time you glitter it.Pick one color to start with if you want to use more.First, apply the second coat of glue to the areas with that color.The other colors will be added after the first one dries.If you want to glitter the entire area, apply the glue over it.The colors will blend together.
Step 8: Put glitter on the glue.
Extra-fine glitter found in the scrapbook section of an arts and crafts store will give you a more professional looking result.iridescent glitter tends to be translucent, while metallic glitter is completely opaque.Put your first color halfway up the design.If you are covering an entire object with glitter, hold the object on its side and slowly rotating it while you shake the glitter off.
Step 9: The glitter needs to be removed.
If you want to knock off excess glitter, turn the project on its side.If you want the first color to end, be careful not to get the glitter past that point.
Step 10: If you are doing an ombre effect, the first color should be dry.
Some of the colors may stick together if you apply your second color too soon.This can make a look messy.Work quickly to add your second color before the glue dries.
Step 11: You can add your second color.
Shake on your second color after applying some more glue.Until your design is complete, color by color.Shake on your second color if you are creating an ombre effect.Take your first color and sprinkle it past where the second one begins.This will help blend the two colors.
Step 12: Once you're happy with your work, remove the tape or stencil.
Lift the stencil or tape by the corner and peel it away.If the glitter does not stay in place, you can push it back into place with a toothpick and wipe it off.
Step 13: Once the glue is dry, re-touch any bare patches.
Take a thin paintbrush and apply more glue if you see any bare spots.Put more glitter on and tape off the excess.
Step 14: Allow the glue to dry.
Depending on what brand and type of glue you used, this can take anywhere from 20 minutes to 4 hours.The curing time for some glues is several days.You can read the label on the bottle of glue.
Step 15: Go over the glittered areas with a dry, fluffy paintbrush.
The tapping did not get rid of the excess glitter.The glitter will not shed when you seal it.
Step 16: If you want basic seal, paint on a coat of Mod Podge.
The best way to move your brush is to top to bottom or side to side.The glue should be extended past the edge of the design and onto the glass.A millimeter or two will suffice, you don't have to extend it by a lot.Make sure you use a glossy finish.If you use a matt finish, your glitter will lose its sparkle and look like sand.Your project will not be washed unless it is waterproof or dishwasher safe.You cannot wash the glittered area, but you can gently wipe it clean.Use caution if your dishwasher is said to be safe.If you leave it soaking, the glitter will peel off.It would be better to hand wash them.
Step 17: If you want moreDurability, use anAcrylic spray-on Sealer.
Don't use a matt finish, or your glitter will loose its sparkle, choose a clear, glossy finish.You should apply a light coat.Wrap a plastic bag over the un-glittered part of your project if you glitter only one part.Even though the seal is clear, it can still change the look of glass.Some people think spraying their projects with glitter makes them more durable.If you have to cover large areas, this is great.If you glittered a wine glass base, you should seal the glitter in by spraying the bottom and edges.
Step 18: Before applying a second coat, let the first one dry.
You should apply the second coat the same way you did the first.Make sure that the second coat is completely dry if you want to apply a third coat.