How to fix Water Flow Issues with your Keurig Coffee Maker is a video.
Rather than review any particular model in their coffee maker line-up, today's discussion will be centered on current Keurig models and where they could improve their product line.
It is only out in the wild that user feedback can be used to build a list of Keurig Coffee Maker problems.
There are odd quirks that can leave a coffee dependent person in a challenging spot with a Keurig coffee maker.
The risk of having to do without your coffeemaker can be reduced by regular maintenance.Plugging the machine and letting it cool down is the first step in any repair.
There are a couple of reasons why your coffee is not as good as it could be.
We have discovered a lot of problems from our own tests and feedback.
Whether you are setting up a new machine or trying to power up an existing machine, the correction for a Keurig that won't turn on is fairly consistent.
If the machine doesn't sense there's any fresh water available, it will power down and the magnetic contacts on the reservoir will have to be returned to it.
When setting up your machine, it is important to review the placement of the magnets.It's easy to accidentally move the magnets around in the handling if you don't keep your reservoir.
You can review this setting by referring to your manual and scrolling through the display menu on your machine until you can confirm the auto-timer is off.
It is possible that the heating mechanism and pump will detect a problem and require you to descale the machine or have it repaired.A simple hold of the brew button for 5 seconds can clear any errors.
In order to provide you with a cup of coffee, multiple features have to work in a specific order.
The water has to heat and then be pumped.Something inside the machine is turning off the heating mechanism if the pump is not working.
If there is an obstruction in the water nozzle, it can get stuck in preheating mode if you open the top and apply the paper clip trick.
A needle cleaning tool is included in many Keurigs.You will probably want to power down the machine and let the water cool if it's still very hot.
After the machine has cooled for several hours, there is a repair suggestion that includes using a straw to try sucking or blowing obstructions out of the needle configuration, which should only be attempted as a last resort.
Adding very hot water to the reservoir is an option that can be used to override the preheating process.
Coffee grounds or flavoring from other beverages can get stuck in the needles that puncture the foil lid of your K-Cup.The minerals in your drinking water can gum up your coffeemaker over time.
You can save a lot of time with a thorough cleaning.You can make your coffee with bottled water.
Pull the internal filters and replace them after washing the parts with warm water and soap.
It is important to note that your machine has an internal water source; you may need to dump it before running water through it.
Coffee grounds may be getting into your cup.If possible, remove the needle and clean it with a needle cleaning tool.
Coffee with grounds can come from a variety of sources.The foil lid has needles that puncture it and send water through it.You will get grounds in your coffee if you have hot cocoa or cider.
Other possible reasons for grounds getting into your cup include a K-Cup Pod failure if the foil lid glue is not secure, puncturing will not occur and then the grounds will go everywhere.Coarse ground coffee is a must if you are using a K-cup.
You will probably be disappointed if you try to use your favorite coffee in a K-cup.
The K-cup requires a certain amount of grind size and volume in order to work.
The target brew temperature for a Keurig machine is 192F (89C).
Fans of strong coffee will not be satisfied by the flavor or the temperature of their favorite coffee made in a K-cup.
If you want to avoid grounds in your cup, you should invest in a darker roast and use a coarse grind.
The reuse filter is not easy to clean.It is easy to see why this could be considered a problem.When using this system, recycling options need to grow.
Many users find that their favorite K-Cup coffee has an unpleasant taste after descaling.There are several factors that can be tied to this.
Refer to your manual if you want to make sure you have removed and replaced the filters for your machine.
To correct item 2, dump all the water in the machine and refill it.
If the machine is completely empty, fill it with hot water and run cups to clear away the vinegar smell.
If giving the machine a gentle tap doesn't work when it says to add water but it is full, try removing and emptying the water reservoir and filling it with water again.Any sensor or float issues should be fixed with a gentle tap or shake.
There are two issues that can cause this problem, one of which is the use of the wrong type of water.
The machines don't care for distilled water.It is true that you should use filters to cut down on scale damage, but you don't want to use distilled water.
There is a float on top of the water.Your machine won't get a correct reading on the amount of water in the machine if the float is jammed at the bottom.
The only thing you need to do is shake and tap to get the float out and the machine to work again.
If you don't get a brew, you may need to restart the machine, clean the needle, or reseat the water.
The problem is either mechanical or electric.Plugging the machine into the electric side is the easiest way to fix it.Plug it back in after it sits for at least a minute.Sometimes a simple reset is all it takes.
Water is not flowing somewhere if this doesn't fix the problem.If you want to see how much water is moving, try running the machine with no Pod on the top.
Make sure there is no debris in the puncture needle by removing the needle mechanism from the machine.
Make sure the needle and water drawing tubes are clear by scaling the machine.The burp or slap maneuver may be helpful in this situation.
You can try to solve the problem by taking the water out of the machine, removing the needle mechanism, and cleaning everything.It isn't enough to turn the machine upside down and tap the bottom.
A continuous stream of water can be caused by debris getting into valves and tubes and blocking things open.
If this is caused by scale, you may need to descale your coffee machine.
Let the unit cool down.If you want a cup of coffee, you shouldn't get burned.
The water should be removed and cleaned once it is cool.The needle mechanism needs to be removed if the Pod is still in the machine.Use the needle tool that came with your pot, a paperclip, or a fine brush to clean this.
Descale the machine by dumping out all the liquid.There are notes on cleaning your machine.
The leaking could be caused by debris in the needle or by using the wrong-sized Pod on the top of the machine.
It is important to follow the manufacturer-recommended guidelines in order to avoid damaging your coffeemaker.
It is possible that your Keurig is leaking because it has been over-filled.It is easy to do on the K15/Mini.
If you want to clear the machine after it has been over-filled, put a cup under the water dispensers.
When the machine is turned on, press and hold the brew button.The internal reservoir should be clear by this.
If you want to brew a cup of hot water, add only the recommended amount of water.Contact customer service if the machine continues to leak.
The water canister balances out the appearance of the machine due to the design of these units.
The amount of water available on some units is less than expected.
Some people gave a bad review to Keurig because of the unit's tendency to alert the user to low water levels only after they have begun to brew a cup.This is something that should be looked into by the company.
Design flow has been called into question by those who prefer the deft action of swiftly mounting the canister with their right hand while preparing to hit the start button with the left hand.
As there are more right-hand users in society, this would appear to be a design flow mistake.
Even fresh from the box, Keurigs are not known for being quiet.Descale the machine if you find that it is making more noise than when you bought it.
It's going to make more noise if the mineral or coffee ground gets stuck in the water lines.
It is important to point out the importance of using filters in your water.There are points inside the machine that are sensitive to scale.
If your tap water is high in iron, you should add it to the machine.Don't add anything called "mineral water" to your coffee machine.
When water isn't moving from the outside to the inside of the machine, the "prime" error message comes up.There may be debris in the port that needs to be cleaned.
If the 2.0 coffeemaker is not properly aligned, the machine won't brew.To get the carafe to fit, you need to remove the tray.
The K-cup you use to brew coffee needs to be the right size.3rd party filters are available.
Coffee may taste different because of the amount of coffee you use and the grind.
The settings of the coffeemaker are very specific in that they have to be suited to the style of brew.
Is it possible to hack this?Probably.Will you be at risk of voiding your warranty because of hacks?Very likely.Don't use hacks until you have nothing left to lose, because you can buy many K-cup Pods for the price of a new Keurig.
If you can't get water to move through the Keurig, you may want to try the spanking method or see if the descale light stays on.
The machine needs to be turned upside-down.You should wash the external reservoir while you are doing this.
Invert the machine over the sink to give it a couple of good whacks on the bottom so that it can cool completely.
Add the recommended amount of water and run several hot water cycles.The descale is done when water is moving.
Sometimes a specific part needs to be replaced if you can't get a replacement unit under warranty.
Common replacement parts for the 400 and 500 series Keurig coffee makers are listed below.
If you have been using the same machine for a couple of years, it might be worth buying a new one.Plastic parts, pumps, tubing all wear over time and can cause a lot of issues.
If you replace one part this week, you may need to replace another part the following week.
If you replace the water pump, the new pressure might cause a weakened tube to leak.
The smallest beer is the K55.It has buttons with lights and an easy-to-use interface, but it is quite basic.
This unit is ideal for adults who want to get a single cup of coffee at the same time.Once heated, it only takes a couple of minutes to brew single cups.
The K575 has all the bells and whistles and can be used to make a pot of coffee for families or heavy drinkers.
The screen display has a lot of options to control your brew.If you have a small group of drinkers in the morning, this may be the better option.
Don't forget to keep your dated receipt!Make sure your machine has a warranty card in the box and follow instructions to register it.
Attempting to hack the 2.0 Pod or refilling disposable K-cups will void your warranty.
If you want to upgrade your coffee experience with a K-cup, hang onto your old brew just in case.
You will need a source of coffee while your Keurig is repaired, because customer service can only work so fast.
The last item is of greatest concern because it tends to be more user-preference than how the machine is built.
People who have had to use the 12 month warranty are discovering that it isn't easy to get a replacement.
Those unfortunate enough to have their machine break down less than a year will be told to buy a new one.
This is not good for those who began using the machines when they first came out, as they have grown to love them and are dismayed at this turn of events.
The attention to customer safety and satisfaction is well-known.The newer model, the K-Mini K15, has not run into the same issues.
The Keurig line of coffeemakers is well-known and has a dedicated following.It is helpful to have the ability to brew coffee, tea, and hot cocoa.
If you follow the instructions in the manual, you can avoid working on the coffee maker while it is hot.
The quality of workmanship could be improved.Tech support and warranty service should be improved to show the company's desire for its products.
The convenience of a quick cup of coffee is more trouble than it is worth because of the problems with the coffee makers.