At gas stations and truck stops you can often find air compressor used to fill air tanks.The air will start flowing into the tank once you hook the compressor hose to it.When the tank is full, it's a good idea to keep an eye on the pressure gauge.Ensure that you can reuse the tank whenever you need it by storing it properly.
Step 1: Take the air tank to the compressor.
Most gas stations and truck stops have air compressors.Motorists use the same pump to inflate their tires.If you see cracks or rust in your air tank, it's time to replace it.You can fill your tank at scuba shops, paintball locations, and some sporting goods stores.It's possible to use your own air compressor.You can buy one at a store.
Step 2: Attach the hose to the tank.
The metal valve on top of the tank is where the compressor hose should be pulled down.It is next to the pressure gauge, so it is hard to miss.The back of the fitting has a nozzle over it.Attach the air hose to the spout.It should fit right over them.Where the tank's air hose is on the opposite end of the fitting is where the compressor hose should be placed.
Step 3: The air compressor can be used to pump air into the tank.
Follow the directions on the pump when operating the air compressor.You will need to press a button to use the compressor.The hose has a triggering mechanism that you need to pull to begin pumping air.The size of the tank affects the amount of time needed to fill it.To fill the tank completely, set aside 20 minutes.The tank's valve should be closed.The air will flow into it.
Step 4: The pressure in the tank needs to be between 85 and 125 psi.
It's important to have a clear view of the pressure gauge.The gauge's needle will move as the tank fills.When the needle reaches the red zone, stop adding air.Don't fill the tank beyond the recommended limit because it's dangerous.
Step 5: When the tank is full, remove the air hose.
Remove the hose from the brass fitting once you are done pumping air.All you have to do is put the hose back in its holster and take your tank home.Be careful when moving the tank because it will be heavier now.
Step 6: The air should be released in a well-ventilated area.
The stored air can be dangerous.The air should be released outdoors, away from other people.Keep your clothes, hair, and jewelry out of the tank's hose.Keep the tank away from the flames.Children should not operate the tank.
Step 7: The tank and inflatable item need to be connected to the air hose.
The brass fitting is near the pressure gauge.You used to fill the tank with the opposite end of the ringed spout.You can connect the hose to the item you want to inflate.The tank usually comes with an air hose.You can buy hoses at home improvement stores.
Step 8: The tank's wheel should be turned to the on position.
A small wheel can be found near the brass fitting.To open the tank's valve, turn the wheel clockwise.You should hear the air coming out of the tank.
Step 9: Attach the item to a safe size.
Air will flow until you close the valve again.The inflatable object needs to be filled at a safe level.There's a chance that over-inflated items will burst.It will feel firm to the touch when the item is inflated in the correct size.It shouldn't bulge or burst.
Step 10: The air flow is shut off when the valve is spun clockwise.
The hissing from the tank indicates that air is still flowing.The valve needs to be completely closed.Attach the hose to the thing and let the air out.Don't let the air out of the tank if you're storing it for a while.
Step 11: The tank should be stored in a dry area.
The main causes of corroded tanks are dirt and water.You can store your tank in a shed, closet, or safe area.The air in the tank is likely to be ruined by improper storage.If you left air in the tank, try to keep it around room temperature.Rust can be caused by cold temperatures.
Step 12: The tank should be set away from dangerous materials.
The tank should be kept separate from other gases, oil, lighter fluid, and similar materials.The tank should be left out of the storage area.In the event of a leak, the tank could cause a fire.If the pressure builds up too much it can explode.The tank should be kept away from children and animals.
Step 13: The air should be let out before storing the tank.
Over time, this will prevent the tank from breaking down.The brass fitting you use to fill the tank should have a small ring on it.Pull the ring back until you hear the air hissing.You should wait for it to stop.If you don't use the tank for a while, it's best to drain it.If you want to keep the air in the tank, keep it in a temperature-controlled room.
Step 14: Take the empty tank and drain it.
Before you do this, make sure the tank is empty.Then, remove the air hose valve from the brass fitting of the tank.The excess humidity should be let out of the fitting.Store the tank in a safe spot after you replace the parts.The bottom end of some tanks has a drainage valve.A frequent draining helps your tank last longer.If possible, drain it after each use.