How to disassemble a power reclining sofa for easy moving and how to remove a recliner for an easier move.

The best way to disassemble heavy furniture is to move it to a new location and reassemble it there.

It is possible to disassemble a recliner chair if you follow the right steps.If you can't figure out how to put it back together, it can turn out to be a nightmare.

Recliners are almost the same, but there are differences in the support design and types of screws.

The secret is the same no matter what recliner you own.When you put it back together, follow the same steps in reverse order when you take it apart.

The easiest way to note down the steps is probably using your phone.Take a picture of the steps, including the screws or other small pieces you remove.

Another method is to put travel labels on the parts that are the same color.This will let you know that red goes to yellow and so on.

You should collect all the bolts, screws, and small pieces immediately and store them in a plastic bag.When it's time to put it back together, you don't want a piece to go missing.

Wrap the recliner chair pieces in cardboard or heavy foil to protect them if you move it over a long distance.If you have a leather recliner, this is important.

The recliner's back is the first thing to be removed.If it is still plugged in, make sure you unplugged it from the electrical outlet.

To get to the back with bolted bars, you need to turn the chair over.Take a look at the bars and the size of the bolts.Attach the correct size bit to the drill and unfasten the bolts.

Put the bolts and bars in a bag.It is a good idea to have someone with you to help hold the reclining chair together while you remove the last bar.

To remove the back of a recliner chair, grab the tabs and press them forward.Pull the bottom of the sofa backwards to open the mechanism.Lift the recliner back up.

If needed, you may need to rock it back and forth.Take pictures if you want to color code the pieces.

Start by turning the chair so the back faces up to remove the recliner's back.The locking mechanism is hidden under the upholstery.If you can find a velvet strip, unfasten it and expose the locking levers.

To locate the metal levers, check the frame and points where the arms join the main body of the chair.Check between the seat and the center console if you can't remove the fabric to expose the frame.

Once you have found the levers, loosen them with your fingers or a flathead screwdriver.After removing the back panel, return the chair to its upright position.

If you are moving a large recliner, you can disassemble it into smaller components for easier handling.After arriving at the new location, it is time to reassemble.

If you color code the pieces or take pictures of them, it's not hard.Remove the small pieces from their bag and follow the steps you took to disassemble it in a reverse order.

If you can't remember how you took the recliner apart, it's best to follow the instructions from the manufacturer.

If you don't have the original documentation that came with your recliner, you can often find the manual online by searching your brand and model number.

You should position the brackets with the back of the recliner first.This process can take a while and may be a little frustrating.

The back of the recliner needs to be put in place.The back should be locked with bolts, screws, or other adjusting levels.

There are two types of recliner chair mechanisms.The cable system that controls the reclining of the sofa is the first type.The back of the chair tilts backward when using a lever that releases or lifts the footrest through a cable.

Break or loose connections within the cable can cause malfunction with this type.

The second type of mechanism is a recliner with an arm on the outside.The arm usually reclines the chair and lifts the footrest.

When the screws and bolts securing the arm become loosened, there are some issues that can occur in this type.

Yes.Recliner chairs have a mechanism that allows them to recline.They will be able to remove the back panel to make it easier to move them around.

Electric power can be used to move the back of the seat and the footrest.If you own a power recliner, it's important that you plug it in before you attempt to disassemble it.