Electric razors take much of the time and difficulty out of shaving, but once you are done touching up there is still the matter of cleaning the razor itself.If not maintained, hair clippings and particles of skin can get stuck in the blades of the razor and cause it to malfunction, which can lead to infections and even death.Most electric razors and trimmers are easy to clean.Simply use a brush to remove any debris, then disassemble the razor and give it a quick wipe down with soap and warm water.
Step 1: Make sure the razor is turned off.
You will want to make sure that there is no power going to the razor.The power indicator display will go dark if you slide or press the power button.It might be a good idea to remove the razor completely.You don't want to switch it on while you clean it.
Step 2: The cutting head should be removed.
The part of the razor that comes into contact with your face is called the cutting head.This can be detached by either pulling it straight off the frame or pressing a small latch on the front or back of the head.There is a lot of hair, skin particles, and dust on the inside and outside of the cutting head.The detached cutting head can be used to remove hair clippings from your sink.Don't damage the delicate blades or cutting foils as they can easily be warped out of shape.
Step 3: Remove hair and other debris.
The cutting head should be removed with a stiff-bristled brush.A small brush is included in most electric razors.A cheap nail brush from your local pharmacy will do the trick if your razor doesn't come with a brush.Smooth sweeping motions can be used to remove debris without applying too much force.If the cutting head of your razor is not dirty, run it under the faucet and dry it with a towel.
Step 4: The cutting head needs to be replaced.
When you have brushed off as much debris as you can, snap the cutting head back into place on the end of the razor's frame.It is secure if you listen for it to click.The razor can now be used as usual.Every time you shave, make an effort to brush your razor's cutting head.
Step 5: You can power up the cleaning dock.
Plug the exterior power cord into the wall outlet and wait for the power indicator light to come on.If you have a separate power switch for your razor's dock, make sure to flip it into the "on" position.Many newer electric razors have a docking base that automatically charges and cleans the razor.The easiest way to keep your shaver clean is through this method.Keep your razor's dock away from the shower or sink to prevent it from getting wet.
Step 6: The razor should be put into the dock first.
Attach the head of the razor to the dock.You will most likely hear a click or see a light that will let you know the razor has been attached.With the razor in place, the dock can clean, polish, oil and dry the cutting head in just minutes with the push of a button.Before docking, be sure to remove the protective cap on your razor.If you are unsure how to proceed, follow the instructions in the user's manual.
Step 7: The cleaning cycle should be activated.
The button on the base indicates the dock's cleaning function.There are different cleaning options for more advanced units.If this is the case, you should pick your preferred option.A quick, normal and intensive setting will likely be included in the different cleaning options.It will take longer to complete each subsequent setting.In addition to cleaning the blades or foils, the dock will also apply a fresh coat of lubricating oil and rapidly dry the razor using an internal heat source.
Step 8: The razor should be removed and stored.
Wait for the dock to finish cleaning the razor.Take it out of the base and use a stiff-bristled brush to remove any hairs from the razor's outside.If your model has a protective cap, replace it and leave the razor in a dry place until your next shave.As soon as the automated cleaning cycle is complete, your razor will be ready for use.If you want to keep your razor safe from the elements, you should invest in a hard-shelled case or storage bag.
Step 9: The razor needs to be disassembled.
Remove the power cord from the wall outlet and switch the razor to the off position.Remove the protective cap, snap off the cutting head, and remove any other parts that are not replaceable.If you don't own a self-cleaning model, your best bet is to break the razor down and manually clean it.
Step 10: The components should be washed with hot, soapy water.
Add a few drops of soap to the water.After brushing the cutting head and other parts of the razor, you can use a soap solution to clean them.After that, rinse them under a stream of hot water.Cleaning the blades with soap will help cut through the oil and skin that accumulate inside the cutting mechanisms.Don't get any pieces that are connected directly to the battery or electrical input wet.
Step 11: The razor needs to be wiped down.
Wet a cloth with warm water and wring it out.The edges of the frame and the collar that hold the cutting head in place are places where hair and debris can be found.It's a good idea to dry any standing water with a towel.To scrub the edges of the frame, use a corner of a washcloth.It's important to remove as much debris as possible.Once the cutting head is reattached, any particles left behind could be pulled back into the blades.
Step 12: Before using the razor again, allow it to dry.
Pat each piece gently with a towel, then set them aside for air drying.This should take about half an hour.You shouldn't try to reassemble or turn on your razor until it's dried completely.If you want to speed up the drying process, don't use a hair dryer.This could result in permanent damage to your razor.