At gas stations and truck stops you can often find air compressor used to fill air tanks.The air will begin to flow into the tank once you hook the compressor hose to it.When the tank is full, it's a good idea to keep an eye on the pressure gauge.Ensure that you can reuse the tank whenever you need it by storing it properly.
Step 1: Take your air tank with you.
The majority of gas stations and truck stops have air compressors.Motorists use the same pump to inflate their tires.If you see cracks or rust in your air tank, you should get a new one.You can get your tank filled at scuba shops, paintball locations, and some sporting goods stores.It's possible to use your own air compressor.You can buy one at a store.
Step 2: Attach the air hose to the tank.
Pull the compressor hose down to the metal valve on top of the tank after setting it on the ground.It is next to the pressure gauge and is hard to miss.The nozzle should be over the spout on the back of the fitting.Attach the air hose to the spout.It should fit right over them.The tank's air hose should be on the opposite end of the fitting.
Step 3: The air compressor should be used to pump air into the tank.
Follow the directions on the pump to operate the air compressor.You will need to press a button to start the compressor.The hose has a triggering mechanism that you need to pull to begin pumping air.The size of the tank affects the amount of time needed to fill it.To fill the tank completely, set aside 20 minutes.The tank's valve should be closed.The air will flow into it.
Step 4: The pressure in the tank needs to be between 85 and 125 psi.
You should have a clear view of the pressure gauge.The gauge's needle will move as the tank fills.When the needle reaches the red zone on the gauge, stop adding air.Don't fill the tank beyond the recommended limit.
Step 5: The air hose should be disconnected when the tank is full.
Remove the hose from the brass fitting when you are done pumping air.All you have to do is put the hose back in its holster and take your tank home.Be careful when moving the tank because it will be heavier now.
Step 6: The air should be released in aventilated area.
The stored air can be dangerous.Don't let the air out of the house, away from other people.Stay away from the tank's hose with clothing, hair, and jewelry.The tank should be kept away from open flames.Children should not be allowed to operate the tank.
Step 7: The tank and inflatable item need to be connected to the air hose.
The brass fitting is near the pressure gauge.You used to fill the tank with the opposite end of the ringed spout.You can connect the hose to the item you want to inflate.The air hose is usually included with the tank.You can buy new hoses at home improvement stores.
Step 8: The tank's wheel should be turned to the on position.
A small wheel can be found near the brass fitting.To open the tank's valve, turn the wheel clockwise.You should hear the air coming out of the tank.
Step 9: Attach the item to a safe size.
Air will flow until you close the valve again.The inflatable object needs to be filled at a safe level.There is a chance that over-inflated items will burst.It will feel firm to the touch when the item is inflated in the correct size.It should not bulge or burst.
Step 10: The air flow is shut off when the valve is spun clockwise.
The hissing from the tank indicates that air is still flowing.The valve needs to be closed completely.Remove the hose when you are ready to release the air inside.Don't let the air out of the tank if you're storing it for a while.
Step 11: The tank should be kept in a dry area.
The main causes of corroded tanks are dirt and water.You can keep your tank in a shed, closet, or safe area.Improper storage can taint the air in the tank and cause it to rust.If you left air in the tank, try to keep it at room temperature.Rust can be caused by cold temperatures.
Step 12: The tank should be set away from fire.
The tank should be kept separate from other gases, oil, lighter fluid, and similar materials.The tank should be left in the storage area.The tank could cause a fire if it leaked.If the pressure builds up too much, it can explode.The tank should be kept away from children and animals.
Step 13: The air should be let out before storing the tank.
This will prevent the tank from breaking down over time.The brass fitting you use to fill the tank should have a small ring on it.Pull the ring back until you hear the air hissing.Wait for it to stop.If you don't use the tank for 2 or 3 months, it's best to drain it.If you want to keep the air in the tank, keep it in a temperature-controlled room.
Step 14: The empty tank should be tipped over to drain the water.
Before you do this, make sure the tank is empty.Then, remove the air hose valve from the brass fitting of the tank.The excess water should be let out of the fitting.Store the tank in a safe spot after you replace the parts.You can easily remove the drainage valve on some tanks.Frequent draining helps your tank last longer.If possible, drain it after each use.