Cold Room panels can be manufactured 60 mm, 80 mm, 100mm, 120mm, 150 mm and 200 mm thickness. Panels are produced with 116 cm width and any desired length up to 13,5 meter.
Can you cut coolroom panels?
The Panel Cutter produces a smooth clean cut for all types of EPS panels. The double bevelled edges fold the edge as you cut to improve panel joints.
Are coolroom panels waterproof?
Cool room panels are impermeable to water, with less than 0.7% water absorption rate; they are practically waterproof.
How do I join coolroom panels?
https://www.youtube.com/watch?v=1A2_OOHAscE
How do you clean cold room panels?
- Rinse the surface thoroughly with clean water. Cold rooms are ideal storage for food and beverages.
- Avoid concentrated and harsh cleaners.
- Use caution with high-pressure cleaning.
- Keep water out of panel joints.
- Follow through with a clean rinse.
Can you paint insulated panels?
Only water-based acrylic or latex paint should be used on foam insulation, whether you are using the material for crafts or are painting unfinished walls. Avoid any oil-based or other solvent-based paints, these contain chemicals that damage foam. A wax sealant can then be applied to protect the paint.
Can you paint cold room walls?
Generally speaking, interior paint should be applied at a temperature no lower than 40 degrees Fahrenheit and no higher than 85 degrees. In other words, room temperature is perfectly fine for typical commercial painting projects, but your cold storage facility must maintain its chill.8 Apr 2021