How much does it cost to install a quarter round?
The cost to have quarter round trim professionally installed is around $390 for a 20 x 20 room.If you need to purchase tools and fasteners, the cost of the most commonly used trim might be higher.
Installation of quarter round trim costs between $3.30 and $6.50 per linear foot depending on the material used.Other factors are discussed.You can ask your installer to pick up the trim, but many homeowners buy the material and have a carpenter install it.If it isn't pre-finished from the factory, some will paint or stain it.
A quarter round trim is shaped like a circle.It is fastened to the baseboards or the wall for a minimalist look.Quarter round trim is an economical and attractive option to bridge the gap between hard flooring like hardwood floors and ceramic tile flooring.
The cost of materials and supplies for do-it-yourself enthusiasts is included in the quarter round molded cost estimate.If you are considering those projects, see our cost estimates for Floor/Baseboard trim.
We think this is a good project to do yourself.You can find retail costs for the quarter round mold in the various materials used, as well as the cost of fastening, tools need and more.
If you use cheap molding, the quarter round cost can be as low as 85 cents per foot.When pre-finished oak is professionally installed, the price can go as high as $6.00 per foot.Why the cost range?You can narrow your price estimate by using these cost factors.
15 to 20 linear feet of 14 round trim per hour is how it works out.Home Advisor says trim carpenters charge between $65 and $100 per hour for labor alone.Our estimate for the cost of a porch is $5.38 to $8.11, a little higher than our estimate, but not out of the question if you use pre-finished oak or a similar material.
Do-it-yourself is a mindset that is focused on finding a cost-effective way to complete a home improvement project.This is a project that you can complete yourself and save money.
The most difficult part of installing quarter round trim is figuring out which way to cut inside and outside corners so that they line up.There are lots of videos that will show you how to cut angels.The material is affordable and there is a short learning curve.A couple pieces will not break the budget.It's important to keep a few tips in mind.
If the trim is unfinished you will need to stain or paint it to match or contrast the baseboard.You can save money by not buying finished material and having more options for finish color.The cost of having an installer paint or stain the trim can be as high as $2.50 per linear foot, according to Homewyse.
The unfinished quarter round trim will cost less than the finished one.It will take longer to finish the project if you decide to go the unfinished route.
Installation companies like to cut and fit all the pieces before starting to nail or caulk them.As they go, others measure and cut.The pieces should be labeled in the order they will be installed.
The brad gun / pin gun is recommended for this project because it reduces the chance of damaging your trim when securing it to the baseboards.If you choose to use hammer and finishing nails make sure you use a nail set to secure the job without the risk of damaging trim.Other installers don't use nails at all, just a thin bead of caulk.It makes it easier to remove the trim in the future if you use that approach.
A bead of caulk is run along the top of the trim.Cut the end of your caulk tube so that the bead is wide enough to cover the top of the quarter round.Less is more.One round of caulk is needed along the top of the trim.The caulk should be used to blend the trim with the wall.
In addition to the higher cost hardwood, it will have to be predrilled to prevent splitting when installing the quarter round.When installed by a contractor, this will add an additional cost.
Go pro?If you want to save time and money, hire a contractor to take care of the job.If you want the job to be done without thinking too much about the details or if you are unsure about operating power tools.