- Set the mode to “Heat”.
- Press the arrow going up until you reach a temperature that is at least 3 degrees higher than the temperature in the room. ...
- Put the switch in the “Off” position. ...
- Press the “Reset” button to reset the thermostat and erase all your settings.
Why is my Braeburn thermostat not working?
Check and Replace the Batteries So, the first step to try if your thermostat isn't working is to check the batteries. If the low battery warning is flashing on the display, then you need to get the batteries replaced. ... You may refer to your user manual to see recommended batteries for your Braeburn thermostat model.
What does it mean when cool is flashing on Braeburn thermostat?
Most newer Braeburn thermostat models will flash the word HEAT or COOL when the thermostat is calling for your heating or cooling system to run. When the call for heating or cooling is over, the word HEAT or COOL will become solid.
How do I reprogram my Braeburn thermostat?
- Press the 'prog' button on your thermostat.
- Press the system button until it lands on the cool or heat setting. ...
- Next, select the day/time button to create settings for each day. ...
- Use the arrow buttons to adjust the time and temperature you need.
How do I adjust the temperature on my Braeburn thermostat?
1. Press and hold or button for 3 seconds. The entire display will flash once and the SET indicator will be flashing. Release the or button and press the or button again as desired to adjust the set temperature.
How do you turn on a Braeburn air conditioner?
https://www.youtube.com/watch?v=QYbRFITjBac
How do I override my Braeburn thermostat?
You can temporarily override the program at any time by pressing either the UP or DOWN arrow button for about 2 seconds until the display flashes once. At that time you can use the UP or DOWN buttons freely to change the desired set point temperature. the display will return to normal mode after a few seconds.