Ensure that Bluetooth is on, as indicated by a small icon on the upper right corner of the smart device screen. 3. Press and hold the Program button again until Kevo beeps (if sound is turned on). The Bluetooth symbol in the top right corner of the screen should blink while Kevo and smart device are communicating.
How do I pair my Kwikset lock?
Pairing Your Lock With the Xfinity Home App On the Overview screen, tap the More icon, then tap Add a Device. On the Add a Device screen, tap the Kwikset model number you purchased. Tap Continue. You will be presented with tasks to complete before you can move forward with device pairing.
How do you program a Z-wave Kwikset?
- Enter exclusion mode. Put your system into its Z-Wave exclusion mode. ...
- Clear the lock. Bring the Kwikset Lock close to your panel or the Z-Wave controller. ...
- Enter inclusion mode. Now that the lock has been cleared, you can begin the pairing process. ...
- Pair the lock.
How do you change the code on a Kwikset Z-Wave lock?
- Make sure the door is open. Press the Program button once.
- Press checkmark symbol once.
- Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
- Press lock symbol once.
How do I reset my Z-wave Kwikset?
- Remove the cover. Take off the lock's cover. ...
- Power down the lock. Remove the battery pack. ...
- Press and hold "Program". Press and hold the "Program" button. ...
- Power on the lock. ...
- Wait for confirmation. ...
- Finish the reset.
How do you change the 4 digit code on a Kwikset lock?
Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.
How do I unlock my Kwikset code?
- Ensure the User Code is valid/correct. Double-check and try again.
- Use a physical key to unlock it—if it still won't unlock with a User Code.
- Call Kwikset technical support or a locksmith for help—if it doesn't unlock with a physical key.
How do I factory reset my Kwikset 916?
https://www.youtube.com/watch?v=r_iB9m3Fr2E
How do I factory reset my Kwikset 910?
Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.