- Make sure that your thermostat is set to "cool" and not "heat" (if it's set to heat, your AC won't turn on no matter what).
- Turn the temperature setting 5 degrees below the current temperature to see if your AC will turn on.
How do I reset my Carrier AC unit?
- Locate the "Reset" button on the air conditioner's control panel. ...
- Press and hold the "Reset" button down for 3 seconds and then release. ...
- Press and hold the "Reset" button down for another 3 seconds -- this time a light should flash on the display.
Why can't I turn on my AC?
If your AC unit won't turn on, the first thing you should check is if there was a blown fuse or a tripped breaker. There's a good chance that the problem is a tripped breaker if the circuit was overloaded. ... However, it is also possible that a power surge caused your air conditioner to blow a fuse or trip a breaker.
How do you set a Carrier AC unit?
https://www.youtube.com/watch?v=AmWJ2X4Z-Og
How do I turn on my carrier thermostat?
Using the Touch Screen: Open the door, if there is one, and touch the screen or the menu button; press the "up" and "down" buttons until date appears. Press select, and use the up and down buttons to choose the current day. Press next to move on to the month, then repeat for the year, hour and minute.
How do I get the AC to turn on?
- Check your Thermostat. ...
- If your air filter is covered in dust, this is likely the problem. ...
- Look for a Blown Fuse/Tripped Circuit Breaker. ...
- See if the Emergency Shut-Off Switch Is OFF. ...
- Check the Inside Unit's Power Switch. ...
- Make Sure the Drain Pan & Lines Aren't Clogged. ...
- Look for a RESET Button.
How do I reset my Carrier air conditioner?
- Locate the "Reset" button on the air conditioner's control panel. ...
- Press and hold the "Reset" button down for 3 seconds and then release. ...
- Press and hold the "Reset" button down for another 3 seconds -- this time a light should flash on the display.
How do I turn on my carrier AC without a remote?
Pressing the RESET button, the unit can start or stop without using the remote control. Operation mode is set on AUTOMATIC operation, preset temperature is 25°C and fan operation is automatic speed. Set the timer when the air conditioner is operating.