An F/dL error code indicates a problem with the door lock. The error code will pop up when the door fails to lock. The washer will display the error code after six attempts to lock the door. To fix the issue, the door lock assembly needs to be inspected for loose or broken wires and other signs of damage.Oct 4, 2021
How do I fix the F5 on my Whirlpool washer?
Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.Apr 5, 2021
What does F code stand for?
Mental, behavioral, and neurodevelopmental disorders
How do you clear the F code on a Cabrio washer?
Unplug the washing machine for 2 minutes and then plug it back (it will help the appliance re-conduct self-diagnostics and conclude that there is no breakdown); Press the START and PAUSE buttons simultaneously and hold them for 1 minute to clear the error code.
Why does my washer keep saying F?
The “F” error code indicates the washing machine system or “Fault”. Ehe “E” error is indicating the part in your washer that causing the issue or “Error”. As a general rule, these “F” error codes mean the following… ... – Whirlpool Duet Washing Machine F5 error code indicates door lock and door switch issues.Mar 21, 2017
How do you reset the codes on a Whirlpool Cabrio washer?
Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.Sep 10, 2015
What does F mean on Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won't run at all.
What does F mean on Maytag washer?
The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. ... If the error code returns, check to be sure the drain hose isn't clogged or kinked.
How do I fix f1 error on my washing machine?
https://www.youtube.com/watch?v=BAVS9mI3JLQ
How do I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.Jun 15, 2020
How do you reset the control board on a Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.