Distance from the neighbour's house The minimum boiler flue installation distance requirement is 600 mm from an opposite wall, building, or fence. If the flue is installed facing the boundary, but on the back garden, then the minimum recommended distance is 300 mm.
What are the regulations for a boiler flue?
The exact distance will depend on the size of your home but, generally, the regulations prevent a boiler flue from being situated within 30-60cm of a window or door. This is to prevent harmful gases from exiting the flue and then re-entering the property through an open door or window.
Can you flue into a Neighbours garden?
If the neighbours property goes right to your wall then you are not allowed because then your flue would be on their property, neither are you allowed to cause a nuisance, the plume from modern boilers can project 3 metres, there are also restrictions on boundaries, you cannot flue within a 600mm of your neighbours May 1, 2013
Where should a boiler flue be placed?
A boiler flue carries potentially dangerous gases out of a boiler so they don't escape back into the home, so the flue needs to be positioned away from an openable window, door or air vent.Sep 2, 2021
What clearance does a boiler flue need?
30-60cm
How high does a boiler flue have to be?
around 30-60cm
How close can a boiler flue be to a wall?
Also, since they are cooler, the gases do not rise and disperse in the air. Instead, they float at low levels. Because of this, condensing boiler flues should be positioned 2.5 m from the adjacent building, wall, fence, or boundary.
How much clearance does a boiler need?
The clearance between any component of the boiler and any other boiler or equipment shall be not less than 24 inches.
How much clearance does a boiler flue need?
Flue position Depending on the size of the boiler, the flue must be positioned a certain distance from the nearest window, door, or air brick. Typically this is around 30-60cm if it's to the side or above the opening, and a bit more if it's below.Feb 3, 2018