Fixya error message on croc flat iron, how do you reset it?
I will be showing you how to fix a croc with a strap that has been detached.I had to find a replacement for the piece of plastic that connects the strap to the croc.The spreaders in my pictures are different because I messed up the blue one.
I used a hand saw and a hot glue gun to cut the croc.
The glue spreader needs to fit through the holes in the strap of the croc.I didn't have to sand it down to fit through the holes.
The next step is to mark the location of the spreader.To do this, you have to pass it through both holes of the croc, and then mark it a bit further away from where it meets the inside.Cut the marked part and the spreading part at the same time.
To make the circle that is inside the croc, you have to take the glue gun and squeeze it out until it's the same diameter as the piece that usually holds it in.The circular part of the strap should be the same size as the original piece if you don't know it.
All you have to do is take the hot glue gun, melt a bit of the circle in the center, and add some glue to the indent you just created.Put the glue spreader through the holes and glue it to the circle of hot glue.