Jute rope is a great addition to your house.It is possible to change the color of a piece to create an accent.You can make a colorful craft with a few household ingredients and some fabric dye.
Step 1: Direct dye packets, like iDye, can be used.
The effect of these dyes on natural materials will be better.Dissolvable powder packets make it easy to add and mix these products.In hobby stores or online, the dye can be purchased.Liquids can be used to control the amount you are adding.
Step 2: Take the rope out of the warm water and presoak it.
The rope is prepared to accept the dye.Leaving the rope a little damp is what you should do.It is better to have wet fabrics than dry ones.
Step 3: The end of the rope needs to be tied.
When you want to re-wrap the rope, you can use this dowel.It will prevent the end of the rope from getting caught in the pot.Attach the rope to the center of the dowel with a simple knot.
Step 4: Bring the pot full of water to a boil.
There is a direct dye that is activated with heat.Bring your water to a boil.The water should be brought to a boil after it is boiling.If you cook in a pot that has dye in it, it is a good idea to use a different pot.
Step 5: The soap should be added to the water.
Adding dish soap to your water will help spread the dye and coat the rope evenly.To avoid bubbles, stir the soap slowly.
Step 6: The water can be boiled in a measuring cup.
You will mix the water with your dye before putting it in the pot.Keep it away from the boiling water.
Step 7: Add the dye packet to the microwaved water.
As you want to reach the desired color, use as much of the dye packet as you can.You will get a more vibrant color if you use the full packet.Jute rope is a natural brown color and will deepen the colors.If you want a truer color, consider using an ivory rope.To get an idea of how the final color will turn out, test the dye on a paper towel.
Step 8: The rope should be placed in the pot of water.
If you want to avoid more tangles and knots, wrap the rope around the handle of the pot.You will be able to cut off the undyed portion of the rope.Make sure the rope is completely submerged so that it can move freely in the pot.
Step 9: The dye mixture should be put in the pot.
Slowly pour the measuring cup of dye and microwave the water into the pot.It is important to remember that splashing the dye will stain clothes and materials.To stir the pot as you add the dye, use a wooden or plastic spoon.
Step 10: After 5 minutes, add 2 cup of vinegar.
Adding a liquid to the color will make it more intense.Make sure to stir the vinegar thoroughly.White vinegar is the best for this step.
Step 11: The rope should be simmering for 30 minutes on low.
Let the rope rest in the water for 30 minutes when the heat is low.To evenly spread the dye, stir consistently with a wooden or plastic spoon.
Step 12: The water and rope should be dumped into the sink.
Take the water out of the sink.Don't let the water splash.You will have to rinse the dye from the rope if it falls into the sink.You can protect your skin and clothes from stains by wearing rubber gloves and an apron.
Step 13: Slowly changing the temperature, rinse the rope with warm water.
Run hot water over the rope to get rid of the excess dye.The water should be changed from hot to cold over time.Continue until the rope is clear of water.Continue using warm water if the color is too dark.When you are happy with the color, you should switch to cold water.
Step 14: Re-wrap the rope.
Pull out the remaining water from the rope once the excess dye is removed.Re-wrap the rope and let it hang to dry.The rope may lighten in color as it dries.If you want to account for this, leave the color a little darker.