Do brand new lawn mower blades need to besharpened?

When using a dull lawn mower blade, joy can quickly turn to frustration.The list goes on and on.

Is it necessary to sharpen a new mower blade?There is no need to sharpen a new lawn mower blade.

We will answer questions about lawn mower blades.What should you not do when changing your lawn mower blade.

If you need help sharpening your mower blade, check out the video.

The lawn mower blades need sharpening.A dull blade can cause jagged tips on your grass blades.The grass is stressed by the dull blade and the grass tips are yellow.A sharp blade is better for the lawn and the engine of your mower.

Your mower blade needs to besharpened at the start of every new season, and more often if your yard is large.Setting your mower cutting deck to the lowest level will cause the blade to impact objects more often and will require more regular sharpening.

The mower blade should be replaced every third to fourth season.A mower blade that cuts a small mature yard will last longer.New yards have rocks, stones and debris that can cause the blade to become dull and wear out quickly.

A new blade solved all the cutting and bagging problems this mower had.

The leading edge of a mower blade needs to be trimmed and the face free from scratches.If you want to prevent a gas spill, turn your mower over on its side, but always with the side facing the sky.

Run your finger along the blade while wearing a glove.Is it possible that there are large dents or scratches?Your blade needs to be sharpened if the answer is yes.

If the mower blade is not badly damaged or worn, you can sharpen it.The best way to balance a mower is to remove the blade.

Unbalancing the blade on the mower will cause the whole mower to vibrate.

If your mower blade is more than four years old, you should replace it.You will need a Torque wrench to tighten the blade bolt.

If you don't use a Torque wrench to tighten a mower blade, it will come loose or destroy the engine.I wrote about the best Torque wrench for mower blades.

It is important to tighten your blade.You might think a mower blade is tight.

The end of the engines crankshaft is where the blade boss is fitted.If the mower blade hits a solid object, a blade is designed to slip on the blade boss.

If the blade is tightened too much it will cause it to slip on the boss and destroy the engine.

The best results are achieved by removing the mulching blade before sharpening and balancing it.

A lawn mower blade bolt is a right hand thread.The mower is on its side.Turn clockwise to tighten the bolt.To loosen the bolt, turn clockwise.I wrote a post about how to remove a stuck blade bolt.

The trailing edge of the mower blades will be lifted.The underside of the mower body is where the lifted edge points upwards.

A single bladed mower doesn't need to be timed.A twin blade walk behind mower will need blade timing.The timed blades are supposed to overlap.

The uncut grass between the blades can be prevented by overlapping blades.If you have a timed deck, the blades will need to be timed if they can touch each other.

There are a number of reasons why your mower is cutting differently.

A lawn mower deck should be level.Some mowers have a single lever and others have height adjustments at each wheel.To level the deck, adjust the wheel heights.