If just a single control arm needs replacing, it will typically cost between $50 and $100. If the damage is to the whole system, you would need to purchase a control arm kit for around $100 to $250 .May 1, 2019
Can you drive with lower control arm damage?
How long can I drive with the damaged control arm? With the damaged or worn-out control arm, you can drive your vehicle for a week or less but it should be repaired as soon as you detect the problem through the methods given above before the suspension gets broken.
Can I replace a control arm myself?
Should You Do the Job Yourself? Front lower control arm replacement is straightforward on some cars. But on others, it can be a real challenge. If you have any doubts you can pull off control arm replacement yourself, it's best to leave the job to a professional mechanic.
How long does it take to replace a lower control arm?
On the difficulty scale from 1 to 10, replacing a control arm is 7 or 8. In the shop, it takes about 1-1.5 hours to replace one control arm.
Do I need an alignment after replacing lower control arm?
An alignment after replacing the lower control arm is absolutely required. Because the likelihood of the new control arm, (plus the other parts that should be replaced during this procedure), of being the EXACT same dimensions are extremely unlikely.
What tools are needed to change lower control arm?
Need to replace control arms? The control arms can come in two types: one has 2 bolts through the pivot bushings, and the other has 4 bolts through the sub-frame. The 2-bolt type is quite easy to do and standard tools (metric sockets, hammer, pry bar and torque wrench) are all you need.
How much does a lower control arm cost to replace?
A new control arm can set you back anywhere between $50 to $100, depending on your car or truck. As it is an advanced task, the replacement of this component can cost you more than $100 and go way up to $400 or more.
Are control arms hard to replace?
Control arm replacement can be difficult—especially if the vehicle's suspension is rusted and corroded. Separating the ball joint from the steering knuckle can be tricky, too, if you've never done the job before. And, oh yeah, you'll want to get your car's alignment checked after replacing the control arm.
What happens if lower control arm breaks while driving?
What if the control arm breaks? If the ball joints are worn out then you might be facing difficulty in aligning the vehicle on road. With major damage, there might be a possibility that you will lose control over the wheels, and in the extreme case, if the control arm breaks, the wheel could fall off the position.
How long does it take to change a lower control arm bushing?
How many hours approximately does it take to change lower control arm bushings for this car? One side by the book time is 2.1 hour, but you must have special tools to remove bushings and press new ones in.
How much is the labor to replace a control arm?
Control Arm Replacement Cost - RepairPal Estimate. Labor costs are estimated between $160 and $202 while parts are priced between $465 and $548. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.