Its connector on one end says "PERIF", and it plugs into the PSU's modular output socket called PERIF1 to give you four 4-pin Molex output connectors.Mar 26, 2017
Is Molex to SATA safe?
Molex to SATA adapter cables are a very simple and cost-effective alternative to buying a new power supply. However, they can be a dangerous alternative to getting a quality power supply, potentially damaging your SSD, internal components, and may also pose a fire risk in your home.
Does Molex connect to motherboard?
What still uses Molex? Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD driveCD/DVD driveFour form factors are in common use today, the 5.25″, 3.5″, 2.5″ or 1.8″ drive bays. These names do not refer to the width of the bay itself, but rather to the width of the disks used by the drives mounted in these bays.https://en.wikipedia.org › wiki › Drive_bayDrive bay - Wikipedia, video card, some older hard drive models, and more. Compatible connectors are available from many manufacturers, not just Molex and AMP.
Can you use 4 pin CPU 8 pin?
If your power supply only has a 4-pin connector, it's still quite likely that you can use it in an 8 pin port. If compatible then it will go in on "one side" of the 8-pin connector. This will likely give enough power, but beware over-clocking.Nov 17, 2019
How many watts can a 4 pin CPU handle?
The 4 pin connector on your power supply will serve your CPU well. I have seen other writings that suggest "192 watts for 4 pin" and "288 watts for 8 pin". The true current capacity is more so a limit of the metal etching on the printed circuit boards, than the connector and its connecting wire's gauge.May 8, 2014
Do I need both 8 pin CPU power connector?
If you have more than one 8-pin ATX-12V cable coming from your power supply, you can use either of them to connect to the motherboard. (Some motherboards require two such cables, so both must be used.) You cannot, however, use any 8-pin PCI-E cable to power the motherboard.
What is 4-pin Molex connector used for?
The Molex connector is used for power connections for a disk drive in a computer as well as for other computer components such as CD-ROM's, graphic cards etc. The Molex connectors bring DC power to the drives inside a PC case.
What does the 4-pin connector do?
4-pin Fan. The 4-pin Fan power connector is found on motherboards within a computer case. This connector provides power to cooling fans and is typically used on the fan that cools the CPU.
What is the use and function of 4-pin Molex 4p 12V?
The ATX 4-pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator.Dec 2, 2020
What do you need a Molex cable for?
Molex cables are primarily used for power-supply unitspower-supply unitsThe efficiency of a computer power supply is its output power divided by its input power; the remaining input power is converted into heat. For instance, a 600-watt power supply with 60% efficiency running at full load would draw 1000 W from the mains and would therefore waste 400 W as heat.https://en.wikipedia.org › wiki › 80_Plus80 Plus - Wikipedia, or to connect power-supply units to hard drives, as with the Molex-to-SATA power cable shown below. Molex cables are primarily used for power-supply units, or to connect power-supply units to hard drives, as with the Molex-to-SATA power cable shown below.
Why Molex to SATA is bad?
In a poorly-manufactured adapter, power can arc from the 5.5-volt or 12-volt wire to the ground wire. ... At the very least, this will destroy your adapter. More likely, it will damage your hard drive, and can even cause a fire. We've chosen well-designed molex to SATA adapters, so this shouldn't be a problem.Nov 30, 2019